GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline
CONRAD STORK inspection

Inspection and repair service of CONRAD STORK RB-450H/3

Inspection and repair of CONRAD STORK RB-450H/3 gearbox

  • CONRAD STORK gearbox
  • RB-450H/3
  • Input=___ rpm / ____ KW
  • CONRAD STORK gearbox repair
  • netherlands

Scope of work:

We performed an inspection and repair on a gearbox CONRAD STORK RB-450H/3.

The conversion operations consists of:

  • The follow instructions were produced at the gearbox:
    • Disassemling and cleaning of the gearbox.
    • Inspection of the parts consisting of the following instruction:.

  • Gearbox casing (on board):
    • A visual controlling of the gearbox for bursts, where possible.
    • A visual controlling of the inside and the outside of the preservation.
    • Controlling of the holes for damages and sizings.

  • Inside (service shop):
    • Controlling the condition of the toothing of the gearings.
    • Controlling of the bearings for damages.
    • Controlling of the contact patterns and back lashes of all gearings.
    • Controlling of the axis sizes in way of the bearings of oil seal rings and couplings for measurements and damages.
    • Controlling of the gearing for bursts by means of magnafluxing.
    • Renewing of all seals and bearings.
    • Controlling the condition of the complete friction with the aid of plate coupling.

  • Preparing for test run of the gearbox.
  • Degreasing and conserving the gearbox in two coatings after the gearbox is assembled.



contact us

Location - date:

The Netherlands - October 2013
See Conrad Stork special page

Other types of same brand: