Our activities in Steel, Cement and Mining Industry
Presentation of our Steel / Cement / Mining projects
Overview of our projects is also comming here
| Aligning, vibration analyses, rooth coarse analyses of gearbox of brand KRUPP Inspection of gearbox of brand KRUPP in Tanzania. Our customer has repaired the pinion shaft of the gearbox. The repaired pinion bearings temperature was raising to 90 degree centigrade and also running with high vibration. Our customer asked to inspect the gearbox to report its condition. |
 |
 |
 |
| KRUPP SN11/1400/9 | Tanzania May 2011 |
||
| Inspection and repair of planetary gearbox of brand SEISA - Inspection and temporary repair to be able to run on 50% of it's capacity - Production of outer ring gear of 3 meter + planetairy gears + sun gear + new white metall bearings in 6 weeks - After receival of new part, we machined the outer ring gear local to fit on the other parts of the housing in an local machine shop - Full assembly of the gearbox - Commissioning on-site including aligning, vibration analyses and videoscopic checks |
 |
 |
 |
| SEISA DPP323H | Pakistan December 2010 |
||
| Inspection of gearbox in Serbia - Inspection of gearbox. |
 |
 |
 |
| FLENDER CS0280/710 | Majdanpek, Serbia December 2010 |
||
| Overhaul of gearbox of brand FLENDER - Overhaul of an complete broken gearbox: - Inspection and measuring gears on-site - Checking the gearbox housing in an local machine shop + re-machining the bores - Production of an complete new set of internals hardened and gear-grinded class 4 in 2,5 weeks - Checking gear-assembly on run-out test bed - Assembling on-site |
 |
 |
  |
| FLENDER H2SH Size 24 | South Africa / Zambia March 2010 |
||
| Repair of Flender gearbox DMGH22 - inspection and measurements in U.A.E. - production of an case hardend pinion of 2 meters long - assembly of gearbox and testrun |
 |
 |
 |
| FLENDER DMGH22 | Dibba, U.A.E February 2010 |
||
| Aligning, vibration analyses, rooth coarse analyses of gearbox of brand KRUPP Several companies allready have measured the noise and vibrations of this KRUPP gearbox. We offered not only to measure the installation, but promised to solve the problem. After checking and correcting the alignment, we examined the relation between the axial movement of the input shaft and the noise production of the dryer drum. We are now proposing a modification of the installation. |
 |
 |
 |
| Krupp | Belgium March 2010 |
||
| Gearbox RENK PA63p Inspection and Overhaul Inspection and overhaul of gearbox. Performing a inspection including non-destructive research of the bearings, planetary wheels and other internals. Performing a rooth coarse analyse and determining repair proposal. Repair of all neccessary parts and test run in our facility. After transport field commissioning on-site of the customer. |
 |
 |
 |
| RENK PA63p | India October 2009 |
||