Our activities in Bulk & Container Handling
Overview of our gearbox inspection and repair projects in the Bulk & Container Handling Industry
The Bulk & Container Handling Industry is an important industry for us. Since we are located in The Netherlands near Rotterdam, we do a lot of project for the port of Rotterdam. On this page will find a collection of projects we have done in this industry. By clicking on one of the links below, you can see the details of the project.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- Performing a videoscopic inspection.
- Performing a vibration measurement on the gearbox.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- A visual inspection for the condition of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with the complete gearwheel.
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Renewing of the output hollow shaft.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The follow instructions were produced at the gearbox:
The follow instructions were produced at the gearbox:
The follow instructions were produced at the gearbox:
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Performing a vibration measurement on the gearbox.
FLENDER F1509
- Transporting the gearbox to our fitting shop.
ZPMC FB515.916.D1A-00
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Transporting the gearbox to our fitting shop.
ZPMC FB515.916.D1A-00
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
FLENDER KBH 400/S/So
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
WGW KSHK 1330 S/So
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Performing of the repair constructions.
- Deploying of the inspection report.
ZPMC FH1650.82.C1B
- Performing of the repair constructions.
- Deploying of the inspection report.
FLENDER KBH 400/S/So
- Performing of the repair constructions.
- Deploying of the inspection report.
PIV PLC18-R11-G11
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with the complete gearwheel.
ZPMC FB515.916.D1A-00
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
- Performing of the repair constructions.
- Deploying of the inspection report.
- Renewing of the output hollow shaft.
PHB K3 Szg 560
- Performing of the repair constructions.
- Deploying of the inspection report.
ZPMC ZP04-544-01
- Disassembling, cleaning, visual inspection and assembling. Test run with report.
- Renewing of various consumables such as gaskets and mounting hardware.
- Re-assembling of the gearbox.
ZPMC FB515.916.D1A-00
- Disassembling, cleaning, visual inspection and assembling. Test run with report.
- Renewing of all seals and bearings.
- Renewing of various consumables such as gaskets and mounting hardware.
ZPMC FB515.916.D1A-00
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
- The conversion operations consists of: - Cleaning, scraping and coating of the outsidegearbox.
VALMET L500-2
- Disassembling, cleaning, visual inspection and assembling. Test run with report.
- Renewing of various consumables such as gaskets and mounting hardware.
- Renewing of spur bevel gear set.
- Renewing of the pinion shaft.
FLENDER KBH 400/S/So
- Performing of the repair constructions.
- Deploying of the inspection report.
FLENDER FZAZ148 G180M4 L400