Our activities in Bulk & Container Handling
Overview of our gearbox inspection and repair projects in the Bulk & Container Handling Industry
The Bulk & Container Handling Industry is an important industry for us. Since we are located in The Netherlands near Rotterdam, we do a lot of project for the port of Rotterdam. On this page will find a collection of projects we have done in this industry. By clicking on one of the links below, you can see the details of the project.
The Netherlands
January 2012
The Netherlands
January 2012
The Netherlands
January 2012
The Netherlands
January 2012
The Netherlands
January 2012
The Netherlands
January 2012
The Netherlands
January 2012
The Netherlands
January 2012
The Netherlands
December 2011
The Netherlands
November 2011
The Netherlands
November 2011
The Netherlands
November 2011
Belgium
October 2011
The Netherlands
October 2011
The Netherlands
October 2011
The Netherlands
October 2011
The Netherlands
October 2011
The Netherlands
September 2011
The Netherlands
September 2011
The Netherlands
September 2011
The Netherlands
September 2011
The Netherlands
September 2011
The Netherlands
September 2011
The Netherlands
September 2011
The Netherlands
September 2011
On gearbox M.A.N. GUR 670 we performed a revision and inspection.
Our work:
- Disassembling and cleaning.
- Inspection and reporting to our client.
- Assembling and performing a test run with a test run report.
Our work:
- Disassembling and cleaning.
- Inspection and reporting to our client.
- Assembling and performing a test run with a test run report.
M.A.N. GUR 670
The Netherlands
January 2012
Performing a standard overhaul on gearbox CONRAD STORK Koppel H1-H2.
Disassembling, cleaning and inspection.
Disassembling, cleaning and inspection.
CONRAD STORK Koppel H1-H2
The Netherlands
January 2012
Performing a standard overhaul on four gearboxes of M.A.N. B335 x 15,7.
The standard overhaul includes:
- Overall disassembling and cleaning all of parts.
- Inspection and reporting.
- Assembling and making a test run with test run report.
The standard overhaul includes:
- Overall disassembling and cleaning all of parts.
- Inspection and reporting.
- Assembling and making a test run with test run report.
M.A.N. B335 x 15,7
The Netherlands
January 2012
We first disassembled the gearbox of Zollern in different parts.
Revision was performed according to our inspection report.
The parts were send to our workshop for complete inspection.
Assembling the gearbox again and performing a test run.
Revision was performed according to our inspection report.
The parts were send to our workshop for complete inspection.
Assembling the gearbox again and performing a test run.
ZOLLERN UNKNOWN
The Netherlands
January 2012
Performing an inspection and revision on gearbox M.A.N. D475 x 9,74:
- Overall disassembling and cleaning.
- Inspection with inspection report.
- Assembling and making a test run.
- Overall disassembling and cleaning.
- Inspection with inspection report.
- Assembling and making a test run.
M.A.N. D475 x 9,74
The Netherlands
January 2012
Performing an overhaul on gearboxes M.A.N. D475 x 9,74.
Disassembling, cleaning and inspection all of the parts.
All our findings were reported to our client.
Assembling and making a test run.
Disassembling, cleaning and inspection all of the parts.
All our findings were reported to our client.
Assembling and making a test run.
M.A.N. D475 x 9,74
The Netherlands
January 2012
We performed an inspection and overhaul on gearbox M.A.N. D475 x 974.
Overhauling includes:
Disassembling and cleaning all of the gearbox parts.
Inspection with inspection report.
Assembling and making a test run with a test run report for our client.
Overhauling includes:
Disassembling and cleaning all of the gearbox parts.
Inspection with inspection report.
Assembling and making a test run with a test run report for our client.
M.A.N. D475 x 9,74
The Netherlands
January 2012
Inspection and performing a standard overhaul on gearbox M.A.N. D475 x 9,74.
The standaard overhaul includes:
- Disassembling and cleaning all of the gearbox parts.
- Inspection with inspection report.
- Assembling the gearbox again.
- Performing a test run with a test run report.
The standaard overhaul includes:
- Disassembling and cleaning all of the gearbox parts.
- Inspection with inspection report.
- Assembling the gearbox again.
- Performing a test run with a test run report.
M.A.N. D475 x 9,74
The Netherlands
January 2012
We performed an overhaul:
Renewed the sealings and bearings.
We also performed a visual inspection on the gearbox.
At the end we made a test run with a test run report.
Renewed the sealings and bearings.
We also performed a visual inspection on the gearbox.
At the end we made a test run with a test run report.
REINTJES WAF 1562
The Netherlands
December 2011
The Netherlands
November 2011
Disassembling gearbox Lohmann & Stolterfoht onsite.
We transported the gearbox to our workshop for inspection.
In our workshop we performed a visual inspection with an endoscope.
All our findings were reported to our client.
We transported the gearbox to our workshop for inspection.
In our workshop we performed a visual inspection with an endoscope.
All our findings were reported to our client.
LOHMANN & STOLTERFOHT PLANETAIRE
The Netherlands
November 2011
Inspection on gearbox Moventas includes:
- Disassembling and cleaning.
- Replacing the seals for new ones.
- Assembling and alignment of the gearbox.
- Disassembling and cleaning.
- Replacing the seals for new ones.
- Assembling and alignment of the gearbox.
MOVENTAS M3RHF70
The Netherlands
November 2011
Performing:
- Disassembling, cleaning and inspection on gearbox BIERENS-K2A3-80.
- Making a complete inspection report.
- Disassembling, cleaning and inspection on gearbox BIERENS-K2A3-80.
- Making a complete inspection report.
BIERENS K2A3-80
Belgium
October 2011
We were involved in building this gearbox of Moventas.
We gave advise and checked if everything was alright.
We gave advise and checked if everything was alright.
MOVENTAS M3RHF70
The Netherlands
October 2011
On gearbox ZPMC FH1060.35.A2.B we performed disassembling first.
We were able to clean all of the parts and performed a visual inspection.
We renewed the bearings and seals because they were damaged.
Assembling again and for a final check we performed a test run.
We were able to clean all of the parts and performed a visual inspection.
We renewed the bearings and seals because they were damaged.
Assembling again and for a final check we performed a test run.
ZPMC FH1060.35.A2B
The Netherlands
October 2011
On gearbox WGW KSHK 1330 S/So we performed:
- Disassembling, cleaning and inspecting.
- Making a complete inspection report.
- Renewed all bearings and sealings.
- Test run with test run report.
- Disassembling, cleaning and inspecting.
- Making a complete inspection report.
- Renewed all bearings and sealings.
- Test run with test run report.
WGW KSHK 1330 S/So
The Netherlands
October 2011
Disassembling and cleaning of gearbox WGW KSHK 1330 S/So.
Followed by an inspection on all of the parts.
Bearings were repaired and the sealings were checked.
For a final check we performed a test run with test run report.
Followed by an inspection on all of the parts.
Bearings were repaired and the sealings were checked.
For a final check we performed a test run with test run report.
WGW KSHK 1330 S/So
The Netherlands
October 2011
We performed an visual inspection with an endoscope onsite.
Our findings were reported to our client, including
the pictures that we made with our endoscope.
Bearings and seals were repaired by us.
Assembling and adjusting of the gearbox was performed onsite.
Our findings were reported to our client, including
the pictures that we made with our endoscope.
Bearings and seals were repaired by us.
Assembling and adjusting of the gearbox was performed onsite.
ZPMC FH1720.70.C1B-00
The Netherlands
September 2011
Revision Malmedie-coupling.
- Disassembled the coupling.
- Cleaned the gears.
- Renewed all seals.
- Assembled the coupling.
- Disassembled the coupling.
- Cleaned the gears.
- Renewed all seals.
- Assembled the coupling.
MALMEDIE
The Netherlands
September 2011
Performing:
- Exchanging the complete gearbox DEMAG 20Zw / KF.
- Alignment of the gearbox.
- Exchanging the complete gearbox DEMAG 20Zw / KF.
- Alignment of the gearbox.
DEMAG 20Zw / KF
The Netherlands
September 2011
- Disassembling, cleaning and revision on gearbox Demag 20Zw / KF.
- Performing a complete inspection report for our client.
- Performing a complete inspection report for our client.
DEMAG 20Zw / KF
The Netherlands
September 2011
Performing inspection and revision on gearbox Demag 20Zw / KF.
DEMAG 20Zw / KF
The Netherlands
September 2011
This gearbox TGW MHOD 250-125 was leaking.
The gearbox had to be transport to our workshop for repair and inspection.
In our workshop we performed disassembling and cleaning.
Now we could do the inspection and found the bearings and sealings were damaged.
We repaired them and made a test run for a final check.
The gearbox had to be transport to our workshop for repair and inspection.
In our workshop we performed disassembling and cleaning.
Now we could do the inspection and found the bearings and sealings were damaged.
We repaired them and made a test run for a final check.
TGW MHOD 250-125
The Netherlands
September 2011
Visual inspection on gearbox of Reintjes WAF 5555 with our endoscope.
We reported our findings with our client.
We reported our findings with our client.
REINTJES WAF 5555
The Netherlands
September 2011
Gearbox Flender Himmel FDAD-161 was damaged. We disassembled, cleaned and inspected the gearbox. The damage was found and repaired by our engineer.
FLENDER Himmel FDAD-161
The Netherlands
September 2011