GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline
GBS Gearbox Services international

Global Activities

Our activities in Belgium

On this page you will find a selection of the projects we have done in Belgium. Since Belgium is only a few hours away from our headquarters in The Netherlands, we have done a lot of projects in this country. By clicking on one of the links below you can view the details of the project.

Pagina:
1 2 3 4 5 6 7 8 9

Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:

  • Gearbox casing:
  • - A visual inspection of the gearbox casing for bursts.
    VALMET UNKNOWN
    Inspection of a Valmet differential gearbox
    Inspection of a Valmet differential gearbox
    Belgium
    Belgium
    January 2013
    Revisionconstruction and supply comprehensive:
    - Disassembling, cleaning and inspection of the gearbox.
    - Inspection of all parts of the gearbox:

  • Gearbox casing:
  • - A visual inspection of the gearbox casing for bursts.
    VALMET UNKNOWN
    Inspection of a Valmet angle radar gearbox
    Inspection of a Valmet angle radar gearbox
    Belgium
    Belgium
    January 2013
  • Disassembling of the top cover
  • - Fixating of the output spline shafts per fixing plate.
    - The serrations with reference to eachother.

  • Inside of the gear case
  • - In the inside of the gear casing were found metal particles from the broken tooth.
    FLENDER ZE-90
    Inspection and revision on Flender ZE-90
    Inspection and revision on Flender ZE-90
    Belgium
    Belgium
    January 2013
    Revisionconstruction and supply comprehensive:
    - Disassembling and cleaning of the gearbox.
    - Inspection of all parts of the gearbox:

  • Gearbox casing:
  • - A visual inspection of the gearbox casing for bursts.
    VALMET L500-2
    Inspection of a Valmet L500-2 gearbox yet amended
    Inspection of a Valmet L500-2 gearbox yet amended
    Belgium
    Belgium
    December 2012
    On site inspection on gearbox of Hansen.
    One gear was broken, we repaired the damage.
    We also found that one oil pump was leaking.
    We renewed it and the gearbox was repaired.
    HANSEN RNF24-BNN-12,5
    Inspection and revision on Hansen RNF24-BNN-12,5
    Inspection and revision on Hansen RNF24-BNN-12,5
    Belgium
    Belgium
    December 2012
  • The conversion operations consists of:
  • - Disassembling, cleaning and inspection of the gearbox.
    - Deploying of the inspection report.
    - Stop point.
    MAAG Gs-22
    Inspection and repair of a MAAG gearbox
    Inspection and repair of a MAAG gearbox
    Belgium
    Belgium
    November 2012
    Standard overhaul:
    Disassembling, cleaning and inspection.
    Checking for any leakage, tears or damages.
    The shaft was slightly damaged, so we repaired it.
    PHILADELPHIA 8HP-1
    Inspection and revision on Philadelphia 8HP-1
    Inspection and revision on Philadelphia 8HP-1
    Belgium
    Belgium
    November 2012
    Revisionconstruction and supply comprehensive:
    - Disassembling and cleaning of the gearbox.
    - Inspection of all parts of the gearbox:

  • Gearbox casing:
  • - A visual inspection of the gearbox casing for bursts.
    ROSSI MRIV-250U02A
    Inspection and revision on a Rossi gearbox
    Inspection and revision on a Rossi gearbox
    Belgium
    Belgium
    November 2012
    Inspection on gearbox Guida Impianti. Our findings were
    reported to our client. The damage on this gearbox was repaired.
    See our pictures on the left and here below.
    GUIDA IMPIANTI Unknown
    Guida impianti gearbox inspection and repair
    Guida impianti gearbox inspection and repair
    Belgium
    Belgium
    October 2012
    Inspection on gearbox Guida Impianti.
    Our findings were reported to our client.
    The damage on this gearbox was repaired.
    Seals and bearings were renewed.
    GUIDA IMPIANTI 2737
    Inspection and revision on Guida Impianti gearbox
    Inspection and revision on Guida Impianti gearbox
    Belgium
    Belgium
    October 2012
  • The conversion operations consists of:
  • - Performing a visual inspection of the gearbox.
    - Performing of the repair constructions.
    - Deploying of the inspection report.
    FLENDER GRAFFENSTADEN TX61 / 1CV
    Visual inspection on Flender Graffenstaden gearbox
    Visual inspection on Flender Graffenstaden gearbox
    Belgium
    Belgium
    October 2012
    Disassembling, cleaning and inspection on gearbox FLENDER Z-101-KM.
    Performing an inspection report.
    FLENDER Z-101-KM
    Inspection and revision on gearbox Flender Z-101-KM
    Inspection and revision on gearbox Flender Z-101-KM
    Belgium
    Belgium
    September 2012
    Performing:
    Disassembling, cleaning and inspection on gearbox FLENDER Z-101-KM.
    Making a complete inspection report for our client.
    FLENDER Z-101-KM
    Inspection and revision on gearbox Flender Z-101-KM
    Inspection and revision on gearbox Flender Z-101-KM
    Belgium
    Belgium
    September 2012
    Disassembling, cleaning and inspecting on gearbox VALMET S1B-200-EA.
    This gearbox wasn't working the right way, so inspection was needed.
    All our findings were reported to our client.
    VALMET S1B-200-EA
    Inspection and revision on gearbox Valmet S1B-200-EA
    Inspection and revision on gearbox Valmet S1B-200-EA
    Belgium
    Belgium
    September 2012
    On gearbox Pekrun ASR 160 we performed a revision.
    Drawing the inside.
    Disassembling and cleaning the gearbox.
    Inspection and report our findings to our client.
    PEKRUN ASR 160
    Inspection and drawing of the inside of gearbox Pekrun ASR 160
    Inspection and drawing of the inside of gearbox Pekrun ASR 160
    Belgium
    Belgium
    August 2012
    Our engineers performed an inspection on the gearbox
    We disassembled and cleaned the gearbox.
    Founding that the bearings were damaged.
    Renewed the bearings and sealings.
    Assembling the gearbox again and made a test run.
    PEKRUN ASR 160
    Inspection and revision on gearbox Pekrun ASR 160
    Inspection and revision on gearbox Pekrun ASR 160
    Belgium
    Belgium
    August 2012
    Performing:
    Disassembling, cleaning and inspection on gearbox VALMET S1B-200-EA.
    Complete inspection with inspection report for our client.
    VALMET S1B-200-EA
    Inspection and reporting on gearbox Valmet S1B-200-EA
    Inspection and reporting on gearbox Valmet S1B-200-EA
    Belgium
    Belgium
    August 2012
    We performed our repairing work according to the inspection report.
    Disassembling, cleaning and inspecting all of the gearbox parts.
    We renewed all bearings and sealings of gearbox VALMET S1B-200-EA.
    Painting the gearbox in the color our client likes.
    VALMET S1B-200-EA
    Inspection and revision on gearbox Valmet S1B-200-EA
    Inspection and revision on gearbox Valmet S1B-200-EA
    Belgium
    Belgium
    August 2012
    - Disassembling and cleaning the gearbox.
    - Performing an visual inspection with endoscope on gearbox Keller.
    - Report our findings and assembling the gearbox again.
    KELLER S2S III H450
    Visual inspection on gearbox Keller S2S III H450
    Visual inspection on gearbox Keller S2S III H450
    Belgium
    Belgium
    July 2012
    Our client told us this gearbox VALMET S1B-200-EA had structural problems.
    We found this gearbox was leaking.
    So we started performing measurement onsite.
    We did repair the parts and performed a test run for a final check.
    VALMET S1B-200-EA
    Measurement and inspection on gearbox Valmet S1B-200-EA
    Measurement and inspection on gearbox Valmet S1B-200-EA
    Belgium
    Belgium
    July 2012
    Revision of the gearbox and making a complete new gear set.
    Revision includes:
    Disassembling, cleaning and inspection.
    Making an inspection report for our client.
    Assembling and adjusting the gearbox.
    JAHNEL KESTERMANN G2400 / A565
    Revision and inspection on gearbox Jahnel Kestermann G2400 / A565
    Revision and inspection on gearbox Jahnel Kestermann G2400 / A565
    Belgium
    Belgium
    July 2012
    Disassembling of gearbox WGW SBHN 6,5 onsite.
    The pinion was damaged, we had to repair it.
    We transported the damaged pinion to our workshop for inspection.
    We were able to repair the damage and the new pinion
    was send back to our client.
    WGW SBHN 6,5
    Renewing of the pinion of gearbox TWK WGW SBHN 6,5
    Renewing of the pinion of gearbox TWK WGW SBHN 6,5
    Belgium
    Belgium
    June 2012
    On gearbox SEW RF100-L6200 we performed a complete inspection.
    First we disassembled and cleaned the gearbox. After that
    we were able to inspect all parts. The bearings and sealings
    had to be renewed. We renewed them and performed a test run
    with a test run report.
    SEW RF100-L6200
    Inspection and revision on gearbox SEW RF-100-L6200
    Inspection and revision on gearbox SEW RF-100-L6200
    Belgium
    Belgium
    June 2012
    Gearbox was leaking oil.
    Proceedings:
    Disassembling and cleaning gearbox Nord SK 180 X/4 RIS.
    Inspection and reporting to our client.
    We repaired the damage and assembled the gearbox.
    NORD SK 180 X/4 RIS
    Overhauling on gearbox Nord SK 180 X/4
    Overhauling on gearbox Nord SK 180 X/4
    Belgium
    Belgium
    June 2012
    Performing visual inspections on different gearboxes.
    The inspections were performed at our customer.
    Toho Seisakusho ZMPZ-750B
    Visual inspection on different gearboxes
    Visual inspection on different gearboxes
    Belgium
    Belgium
    June 2012

    Pagina:
    1 2 3 4 5 6 7 8 9