GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline
GBS Gearbox Services international

Global Activities

Our activities in Belgium

On this page you will find a selection of the projects we have done in Belgium. Since Belgium is only a few hours away from our headquarters in The Netherlands, we have done a lot of projects in this country. By clicking on one of the links below you can view the details of the project.

Pagina:
1 2 3 4 5 6 7 8 9

Performing a test run with a test run report on gearbox Bierens AB-36,5 spec.
BIERENS AB-36,5 spec.
Test run and reporting Gearbox Bierens AB-36,5 spec.
Test run and reporting Gearbox Bierens AB-36,5 spec.
Belgium
Belgium
December 2011
Disassembling and cleaning of gearbox SEW RF100-L6200.
Renewed all of the bearings and sealings.
We also checked and renewed small parts of the gearbox, like
the mountings. At the end we performed a last test run, before
the gearbox will be delivered at our client.
SEW RF100-L6200
Inspection and revision on gearbox SEW RF-100-L6200
Inspection and revision on gearbox SEW RF-100-L6200
Belgium
Belgium
December 2011
Inspection on gearbox Hansen QVRF2-CUN-11,2.
Disassembling of the gearbox.
Renewed all of the bearings and sealings.
Assembling the gearbox.
Performing a test run.
HANSEN QVRF2-CUN-11,2
Inspection and revision on gearbox Hansen QVRF2-CUN-11,2
Inspection and revision on gearbox Hansen QVRF2-CUN-11,2
Belgium
Belgium
November 2011
Performing a visual inspection on gearbox Keller.
The visual inspection was performed with our endoscope.
Making the inspection report for our client.
KELLER S 2 S III H500
Visual inspection and reporting on gearbox Keller S 2 S III H500
Visual inspection and reporting on gearbox Keller S 2 S III H500
Belgium
Belgium
November 2011
Performing:
- Disassembling, cleaning and inspection on gearbox BIERENS-K2A3-80.
- Making a complete inspection report.
BIERENS K2A3-80
Revision and inspection on gearbox  Bierens K2A3-80 tbv Bandaandrijving
Revision and inspection on gearbox  Bierens K2A3-80 tbv Bandaandrijving
Belgium
Belgium
October 2011
Performing a visual inspection on gearbox DEMAG HVK32-2.
DEMAG HVK32-2
Visual inspection on gearbox Demag HVK32-2
Visual inspection on gearbox Demag HVK32-2
Belgium
Belgium
August 2011
Performing an overhaul of two pieces gearboxes.
Overhaul includes:
- Disassembling and cleaning all of the parts.
- Inspection and reporting.
- Assembling and performing a test run with test run report.
DEMAG 5213
Revision of gearbox Demag 5213
Revision of gearbox Demag 5213
Belgium
Belgium
August 2011
- Disassembling
- Cleaning and inspecting
- Performing an inspection report.
FALK 203772-S
Inspection, revision and modification on gearbox Falk 208722-S
Inspection, revision and modification on gearbox Falk 208722-S
Belgium
Belgium
August 2011
- Disassembling, cleaning and inspection on gearbox Flender SKBA-90.
- Reporting and making a revision proposal.
- Assembling revision accordingn to revision proposal.
- Performing a test run with a test run report.
FLENDER SKBA 900
Inspection and revision on gearbox Flender SKBA-900
Inspection and revision on gearbox Flender SKBA-900
Belgium
Belgium
March 2011
- Gearbox show a heightened level of vibration TPV the teeth.
- Inspection in 2 days
- Performing: - Gearbox after entry immediately disassembled and inspected
- Any damage capturing by pictures
- Drawing up a complete inspection-report
- Stop Point.
BHS RP32 DSU32
Inspection of gearbox of brand BHS
Inspection of gearbox of brand BHS
Belgium
Belgium
March 2011
- Performing an inspection on gearbox Flender DSE-2.95
- Analyzing and reporting.
- Giving advice to our client by performing disassembling.
FLENDER DSE 2.95
Performing an inspection on gearbox Flender DSE-2.95
Performing an inspection on gearbox Flender DSE-2.95
Belgium
Belgium
February 2011
- Disassembling, cleaning and visual inspection on gearbox SANTASALO-2C355-EY2.
- Reporting and making a revision proposal.
- Assembling revision according to revision proposal.
- Performing a test run with a test run report.
SANTASALO 2C355 EY2
Visual inspection with endoscope on gearbox SANTASALO-2C355-EY2
Visual inspection with endoscope on gearbox SANTASALO-2C355-EY2
Belgium
Belgium
February 2011
Preventive inspection of a Flender Graffenstaden, TX61/1CV, load gearbox. The load gearbox is part of a LM6000 gas turbine driven generator set.
FLENDER GRAFFENSTADEN TX61/1CV
Inspection of gearbox of brand FLENDER GRAFFENSTADEN
Inspection of gearbox of brand FLENDER GRAFFENSTADEN
Belgium
Belgium
February 2011
- Disassembling, cleaning and inspection on gearbox SANTASALO-3TKC280-N.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
SANTASALO 3TC280 N
Overhaul and sealing of gearbox SANTASALO-3TKC280-N
Overhaul and sealing of gearbox SANTASALO-3TKC280-N
Belgium
Belgium
January 2011
Standard overhaul on gearbox. Disassembling, cleaning, inspection
of gearbox DEMAG 5213, preparing inspection report and overhaul.
DEMAG 5213
Inspection and overhaul of gearbox of brand DEMAG 5213
Inspection and overhaul of gearbox of brand DEMAG 5213
Belgium
Belgium
December 2010
- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.
SEW D100
Inspection and repair of gearbox of brand SEW drive
Inspection and repair of gearbox of brand SEW drive
Belgium
Belgium
October 2010
Replacement and aligning of gearbox.
WERNER & PFLEIDERER ZSK-92-F-385-E
Replacement and aligning of gearbox of brand WERNER & PFLEIDERER
Replacement and aligning of gearbox of brand WERNER & PFLEIDERER
Belgium
Belgium
August 2010
For the replacement of one of the bearings in a production line, our customer had to dismount the gearbox. During this dismounting the output shaft was damaged and it was thought that the output bearings in the gearbox were also damaged.
LOHMANN & STOLTERFOHT GPV 235
Inspection and full repair of gearbox of brand LOHMANN & STOLTERFOHT
Inspection and full repair of gearbox of brand LOHMANN & STOLTERFOHT
Belgium
Belgium
July 2010
The manufacture and supply of a complete new modified gear set for gearbox: brand Falk type 203 772-S.
FALK 203772-S
Inspection, overhaul and modification on gearbox Falk 203772-S
Inspection, overhaul and modification on gearbox Falk 203772-S
Belgium
Belgium
June 2010
Inspection and overhaul of gearbox Chemineer 7-HTN-25.
CHEMINEER 7-HTN-25
Overhaul of gearbox of brand CHEMINEER 7-HTN-25
Overhaul of gearbox of brand CHEMINEER 7-HTN-25
Belgium
Belgium
June 2010
Inspection and overhaul of gearbox EKATO 313 V-H-KB.
EKATO 313 V-H-KB
Overhaul of gearbox of brand EKATO
Overhaul of gearbox of brand EKATO
Belgium
Belgium
June 2010
Disassembling, cleaning and inspection on gearbox STORD-RS64. Setting up a complete inspection report.
Making a revision proposal. Assembling and revision according to revision proposal.
STORD RS-64
Inspection and revision on gearbox STORD-RS64
Inspection and revision on gearbox STORD-RS64
Belgium
Belgium
June 2010
- Performing a visual inspection on gearbox.
- Adjusting the alignment of the E-motor and checking.
- Analyzing and reporting.
RENE DE MALZINE 4D800
Inspection with endoscope and alignment of gearbox RENE-DE-MALIZINE-4D800
Inspection with endoscope and alignment of gearbox RENE-DE-MALIZINE-4D800
Belgium
Belgium
May 2010
- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.
BONFIGLIOLI UNKNOWN
Inspection of gearbox of brand BONFIGLIOLI
Inspection of gearbox of brand BONFIGLIOLI
Belgium
Belgium
May 2010
- Performing a visual inspection on 4 different types of gearboxes with an endoscope, performing vibration measurements and taking an oil sample for analyses.
- Analyzing and reporting.
BABBINI PB-12
Visual inspection and reporting on 4 pieces gearboxes
Visual inspection and reporting on 4 pieces gearboxes
Belgium
Belgium
April 2010

Pagina:
1 2 3 4 5 6 7 8 9