GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline

Global Activities

Our activities Europe

Update 22-08-2011
Here below are shown some of the countries in which we have worked:
Projects last 6 months
Projects more then 6 months
Projects in progress NOW
The list below shows a selection of the projects we have done, except projects in The Netherlands and Belgium, sorted by country:

Pagina:
Previous 1 ... 3 4 5 6 7 ... 12 Next

  • The conversion operations consists of:
  • - Inspection of the disassembled bow thruster gearbox.
    - Deploying of the inspection report.
    - Stop point.
    LIPS FT09
    Inspection and revision on bow thruster of a Lips FT09 gearbox
    Inspection and revision on bow thruster of a Lips FT09 gearbox
    The Netherlands
    The Netherlands
    January 2014
  • Gearbox casing
  • - Inside box was in poor condition, we had to scrape, to polish,
       to degrease and to conserve in the excisting colour.
    - Outside box was in poor condition.
    WGW SC 1,5/SO
    Inspection and revision on a WGW SC 1,5/SO gearbox
    Inspection and revision on a WGW SC 1,5/SO gearbox
    The Netherlands
    The Netherlands
    January 2014
  • Gearbox casing
  • - The inside conservation was in poor condition. We had to scrape,
       to degrease and to conserve in the excisting colour.
    WGW SC 1,5/SO
    Inspection and revision on a WGW SC 1,5/SO gearbox
    Inspection and revision on a WGW SC 1,5/SO gearbox
    The Netherlands
    The Netherlands
    January 2014
  • The follow instructions were produced at the gearbox:
    • Renewing of all seals and bearings.
    • Renewing of various consumables such as gaskets and mounting hardware.
    • Re-assembling of the gearbox.
    FLENDER KADS 160-K
    Inspection and revision on Flender KADS 160-K
    Inspection and revision on Flender KADS 160-K
    The Netherlands
    The Netherlands
    January 2014
  • The conversion operations consists of:
  •     - Disassembling, cleaning and inspection of the gearbox.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
        - Stop point.
    M.A.N. 08-208
    Inspection and revision on a M.A.N. 08-208 gearbox
    Inspection and revision on a M.A.N. 08-208 gearbox
    The Netherlands
    The Netherlands
    January 2014
  • The conversion operations consists of:
  •     - Disassembling of the gearbox.
        - Modifying of the gearbox.
        - Performing of the repair constructions.
        - Assembling of the input coupling and output cable drum.
    PIV PD31-R10-H14
    The rebuilding of gearbox PIV PD31-R10-H14
    The rebuilding of gearbox PIV PD31-R10-H14
    The Netherlands
    The Netherlands
    January 2014
    Our client had a problem with the gearbox RENK SHSI 3S 1000.
    We performed:
    - Disassembling and inspection.
    - We assembled the complete gearbox again and performed a test run.
    RENK SHSI-3S-1000
    Inspection and revision on Renk SHSI-3S-1000
    Inspection and revision on Renk SHSI-3S-1000
    The Netherlands
    The Netherlands
    December 2013

    This report provides the findings of the exported visual inspection to the gearbox.
    The purpose of the inspection is to determine the condition of the gearbox.

    REINTJES WAF 5555
    Visual inspection on a Reintjes WAF-5555 gearbox
    Visual inspection on a Reintjes WAF-5555 gearbox
    The Netherlands
    The Netherlands
    December 2013
    The follow instructions were produced at the gearbox:
  • Disassembling and cleaning of the gearbox.
  • Inspection of the parts consisting of the following instruction:
  • PIV PLC18-R11-G11
    Inspection and revision on PIV PLC18-R11-G11
    Inspection and revision on PIV PLC18-R11-G11
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  •     - Disassembling and cleaning of the gearbox.
        - Performing of the repair constructions.
        - Renewing of the seals and bearings.
        - Re-assembling of the gearbox.
    WGW KSHK 1330 S/So
    Inspection and revision on WGW KSHK 1330 S/So gearbox
    Inspection and revision on WGW KSHK 1330 S/So gearbox
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and inspection of the gearbox.
        - Performing of the repair constructions.
        - Renewing og all seals, bearings and innerrings.
        - Renewing of diverse small items such as gaskets and bolts.
    KUMERA TNC34002BX504-125
    Inspection and revision on Kumera TNC34002BX504-125
    Inspection and revision on Kumera TNC34002BX504-125
    The Netherlands
    The Netherlands
    December 2013
    The follow instructions were produced at the gearbox:
  • Disassembling and cleaning of the gearbox.
  • Inspection of the parts consisting of the following instruction:
  • CONRAD STORK 2x 2R630
    Inspection and revision on Conrad-Stork 2x 2R630
    Inspection and revision on Conrad-Stork 2x 2R630
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  • - Performing of an inspection of the gearbox.
    - Performing of the repair constructions.
    - Deploying of the inspection report.
    FLENDER ZF148K-IEC250
    Inspection and revision on Flender ZF148K-IEC250
    Inspection and revision on Flender ZF148K-IEC250
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  • - Disassembling of the gearbox on location.
    - Transporting of the gearbox to our workingshop.
    - Performing of the repair constructions.
    FLENDER ZF148K-IEC250
    Inspection and revision on Flender ZF148K-IEC250
    Inspection and revision on Flender ZF148K-IEC250
    The Netherlands
    The Netherlands
    December 2013
    The follow instructions were produced at the gearbox:
  • Disassembling and cleaning of the gearbox.
  • Inspection of the parts consisting of the following instruction:
  • HANSEN PHF23-BRN-12,5
    Inspection and revision on a Hansen PHF23-BRN-12,5 gearbox
    Inspection and revision on a Hansen PHF23-BRN-12,5 gearbox
    The Netherlands
    The Netherlands
    December 2013
    The follow instructions were produced at the gearbox:
  • Disassembling, cleaning and inspection of the gearbox.
  • Inspection of the parts consisting of the following instruction:
  • PIV LB180-12H
    Inspection and revision on gearbox PIV LB180-12H
    Inspection and revision on gearbox PIV LB180-12H
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  •     - A visual inspection of the gearbox.
        - Performing of the repair constructions.
        - Vibration measurement, probably damages at the bearings of the output shaft.
    WGW AA-SCZ-600-2-S
    Visual inspection on a WGW AA-SCZ-600-2-S gearbox
    Visual inspection on a WGW AA-SCZ-600-2-S gearbox
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  •     - Disassembling and cleaning of the gearbox.
        - Performing of the repair constructions.
        - Renewing of the seals and bearings.
    WGW KS 5,75/S/So
    Inspection and revision on a WGW KS 5,75/S/So gearbox
    Inspection and revision on a WGW KS 5,75/S/So gearbox
    The Netherlands
    The Netherlands
    December 2013
    The follow instructions were produced at the gearbox:
  • Disassembling and cleaning of the gearbox.
  • Inspection of the parts consisting of the following instruction:.
  • PIV PD31-R10-H14
    Inspection and revision on PIV PD31-R10-H14
    Inspection and revision on PIV PD31-R10-H14
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and inspection of the gearbox.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
        - Stop point.
    MIELE FAKR1-155-S
    Inspection and revision on FAKR1-155-S gearbox
    Inspection and revision on FAKR1-155-S gearbox
    The Netherlands
    The Netherlands
    December 2013
    The follow instructions were produced at the gearbox:
  • Disassembling and cleaning of the gearbox.
  • Inspection of the parts consisting of the following instruction:
  • MIELE FAKR1-155-S
    Inspection and revision on Miele FAKRI-155-S
    Inspection and revision on Miele FAKRI-155-S
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  • - Disassembling and cleaning of the gearbox.
    - Performing of the repair constructions.
    - Renewing of the seals and bearings.
    HANSEN PDC23S-BNN-14,5
    Inspection and revision on Hansen PDC23S-BNN-14,5
    Inspection and revision on Hansen PDC23S-BNN-14,5
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  • - Disassembling, cleaning and inspection of the gearbox.
    - Controlling of the toothing for bursts with the aid of magnafluxing.
    - Controlling of the tempered parts for bursts with the aid of magnafluxing.
    RADEMAKERS Raplan 275L
    Inspection and revision on Rademakers Raplan 275L
    Inspection and revision on Rademakers Raplan 275L
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  •     - Disassembling and cleaning of the gearbox.
        - Performing of the repair constructions.
        - Renewing of the seals and bearings.
    SIEMENS B2-DH-14C
    Inspection and revision on a Siemens B2-DH-14C gearbox
    Inspection and revision on a Siemens B2-DH-14C gearbox
    The Netherlands
    The Netherlands
    December 2013
  • The conversion operations consists of:
  •     - Disassembling of the inside of the gearbox, the bearings not yet.
        - Renewing of all seals and bearings.
        - Disassembling and inspection of the input and the output coupling.
    DEMAG 200 ZW/KR
    Revision torn Demag 200 ZW/KR gearbox
    Revision torn Demag 200 ZW/KR gearbox
    The Netherlands
    The Netherlands
    December 2013

    Pagina:
    Previous 1 ... 3 4 5 6 7 ... 12 Next