GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline

Global Activities

Our activities Europe

Update 22-08-2011
Here below are shown some of the countries in which we have worked:
Projects last 6 months
Projects more then 6 months
Projects in progress NOW
The list below shows a selection of the projects we have done, except projects in The Netherlands and Belgium, sorted by country:

Pagina:
Previous 1 ... 5 6 7 8 9 ... 12 Next

The follow instructions were produced at the gearbox:
  • Disassembling and cleaning of the gearbox.
  • Inspection of the parts consisting of the following instruction:
  • KONE THV-328H
    Inspection and revision on Kone THV-328H
    Inspection and revision on Kone THV-328H
    The Netherlands
    The Netherlands
    October 2013
  • The conversion operations consists of:
  •     - A visual inspection, a test run and the complete installing of the gear on location.
        - Preparing a test run in our working place for two hours.
        - Disassembling of the gearbox.
        - Renewing all the seals.
    KUMERA LD 4500-25-R-E1
    Making a new gearset and inspection on Kumera LD 4500-25-R-E1
    Making a new gearset and inspection on Kumera LD 4500-25-R-E1
    The Netherlands
    The Netherlands
    October 2013
  • The conversion operations consists of:
  •     - Disassembling of the gearbox with the complete gearwheel on location.
        - The visual controlling of the delivered gearbox.
        - Conserving the inside and the outside of the gearbox.
    WGW KSHK 1330 S/So
    Making a new gearset on WGW KSHK 1330 S/So
    Making a new gearset on WGW KSHK 1330 S/So
    The Netherlands
    The Netherlands
    October 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and an inspection of the gearbox.
        - Performing of the repair constructions.
        - Renewing of the seals and bearings.
    PIV LC180-12H
    Inspection and revision on PIV LC180-12H
    Inspection and revision on PIV LC180-12H
    The Netherlands
    The Netherlands
    October 2013
  • The conversion operations consists of:
  • - Disassembling, cleaning and inspection of the gearbox.
    - Deploying of the inspection report.
    - Stop point.
    HANSEN OR1001447-QVRB2L-CUN
    Inspection and revision on Hansen OR1001447-QVRB2L-CUN
    Inspection and revision on Hansen OR1001447-QVRB2L-CUN
    The Netherlands
    The Netherlands
    October 2013
  • The conversion operations consists of:
  •     - Disassembling and an inspection of two friction shafts.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
    KUYPERS 572845
    Inspection and revision on Kuypers 572845
    Inspection and revision on Kuypers 572845
    The Netherlands
    The Netherlands
    October 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and an inspection of the gearbox.
        - Performing of the repair constructions.
        - Renewing of the seals and bearings.
        - Re-assembling of the gearbox.
    PHB KSZg 355 Pu
    Inspection and revision Swing on PHB KSZg 355 Pu
    Inspection and revision Swing on PHB KSZg 355 Pu
    The Netherlands
    The Netherlands
    October 2013
  • The conversion operations consists of:
  • - Disassembling of the gearbox.
    - Performing of the repair constructions.
    - Controlling of cone with propellor.
    LIPS FT09-HB
    Inspection and revision of bow thruster on a Lips gearbox
    Inspection and revision of bow thruster on a Lips gearbox
    The Netherlands
    The Netherlands
    October 2013
  • Location, day 1
  •     - Breaking of the output coupling and cable drums.
        - Moving of the cable drums on lacation, so we can disassemble the output shaft from the gearbox.
        - Lifting up the output shaft on location and transporting to our working place.
        - Breaking of the input coupling and moving of the E-motor.
    FLENDER KBH 400/S/So
    Rebuilding and a test run on Flender KBH 400/S/So
    Rebuilding and a test run on Flender KBH 400/S/So
    The Netherlands
    The Netherlands
    October 2013
  • The conversion operations consists of:
  • - Inspection of two gearboxes on board.
    - Controlling and recording of the alignment of the input and output shaft.
    - A visual inspection and friction of the inside gearbox.
    CONRAD STORK RB-450H/3
    Visual inspection of 2 Conrad Stork gearboxes
    Visual inspection of 2 Conrad Stork gearboxes
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  • - Disassembling, cleaning and inspection of the gearbox.
    - Deploying of the inspection report.
    - Stop point.
    PHILADELPHIA 3420-CT
    Inspection and revision on Philadelphia 3420-CT
    Inspection and revision on Philadelphia 3420-CT
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and a visual inspection of the gearbox.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
        - Re-assembling of the gearbox.
    SANTASALO YE4-0680HW100-313VTS
    Vibration measurement and visual inspection on a Santasalo gearbox
    Vibration measurement and visual inspection on a Santasalo gearbox
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  • - Inspection of two gearboxes on board.
    - Controlling and recording of the alignment of the input and output shaft.
    - A visual inspection and friction of the inside gearbox.
    CONRAD STORK 3R-320/Spec
    Visual inspection on gearbox Conrad Stork 3R-320/Spec
    Visual inspection on gearbox Conrad Stork 3R-320/Spec
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  • - Disassembling, cleaning and inspection of the gearbox.
    - Deploying of the inspection report.
    - Stop point.
    REXNORD SPRN84C18U-G-280-L-5
    Inspection and revision on a Rexnord SPRN84C18U-G-280-L-5 gearbox
    Inspection and revision on a Rexnord SPRN84C18U-G-280-L-5 gearbox
    The Netherlands
    The Netherlands
    September 2013
       Revisionconstruction and supply comprehensive:
       - Disassembling of the fourteen gearboxes.
       - Inspection of all parts of the gearboxes:
    PHB 3-SZ-500-So
    Disassembling and assembling again and align of 14 gearboxes
    Disassembling and assembling again and align of 14 gearboxes
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  • - Disassembly of the bogie and the gearboxes.
    - Cleaning of the parts.
    - Inspection of the parts.
    - Measuring of the flank backlash on the gears of the gearboxes.
    SANTASALO 3-TKC-180-NE
    Inspection and revision on a Santasalo 3-TKC-180-NE gearbox
    Inspection and revision on a Santasalo 3-TKC-180-NE gearbox
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and inspection of the gearbox.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
        - Renewing of the coupling.
    PHB 3-SG-710 II
    Running small coax on a PHB 3-SG-710 II gearbox
    Running small coax on a PHB 3-SG-710 II gearbox
    The Netherlands
    The Netherlands
    September 2013
       Revisionconstruction and supply comprehensive:
       - Disassembling and cleaning of the gearbox.
       - Inspection of all parts of the gearbox:
    PHB K3SVZg-500
    Inspection and revision on PHB K3SVZg-500
    Inspection and revision on PHB K3SVZg-500
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and inspection of the gearbox.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
        - Renewing of the coupling.
    SANTASALO 3TKC180NE
    Inspection and revision on a Santasalo 3-TKC-180-NE gearbox
    Inspection and revision on a Santasalo 3-TKC-180-NE gearbox
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and inspection of the gearbox.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
        - Renewing of the coupling.
    SANTASALO 3TKC180NE
    Inspection and revision on a Santasalo 3-TKC-180-NE gearbox
    Inspection and revision on a Santasalo 3-TKC-180-NE gearbox
    The Netherlands
    The Netherlands
    September 2013
       Revisionconstruction and supply comprehensive:
       - Disassembling and cleaning of the gearbox.
       - Inspection of all parts of the gearbox:
    PHB 3-SZ-500-So
    Inspection and revision on a PHB 3-SZ-500-So gearbox
    Inspection and revision on a PHB 3-SZ-500-So gearbox
    The Netherlands
    The Netherlands
    September 2013
       Revisionconstruction and supply comprehensive:
       - Disassembling and cleaning of the gearbox.
       - Inspection of all parts of the gearbox:
    PHB 3-SZ-500-So
    Inspection and revision on a PHB 3-SZ-500-So gearbox
    Inspection and revision on a PHB 3-SZ-500-So gearbox
    The Netherlands
    The Netherlands
    September 2013
       Revisionconstruction and supply comprehensive:
       - Disassembling and cleaning of the gearbox.
       - Inspection of all parts of the gearbox:
    PHB 3-SZ-500-So
    Inspection and revision on a PHB 3-SZ-500-So gearbox
    Inspection and revision on a PHB 3-SZ-500-So gearbox
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and inspection of the gearbox.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
        - Stop point.
    ZPMC TB220.13.D1B-00
    Inspection and revision on ZPMC TB220.13.D1B-00 gearbox
    Inspection and revision on ZPMC TB220.13.D1B-00 gearbox
    The Netherlands
    The Netherlands
    September 2013
  • The conversion operations consists of:
  •     - Disassembling, cleaning and inspection of the gearbox.
        - Performing of the repair constructions.
        - Deploying of the inspection report.
        - Stop point.
    ZPMC TB220.13.D1B-00
    Inspection and revision on ZPMC TB220.13.D1B-00 gearbox
    Inspection and revision on ZPMC TB220.13.D1B-00 gearbox
    The Netherlands
    The Netherlands
    September 2013

    Pagina:
    Previous 1 ... 5 6 7 8 9 ... 12 Next