GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline
GBS Gearbox Services international

Global Activities

Our activities in the Netherlands

Our headquarters are located in The Netherlands and we serve a lot of clients in our own country. On this page a selection of gearbox projects done in The Netherlands are included. More information about the project can be viewed by clicking on the links listed below.

Pagina:
Previous 1 2 3 4 5 ... 33 Next

Inspection and repair on FLENDER GCH 1020 gearbox
FLENDER GCH 1020
Inspection and repair on FLENDER GCH 1020 gearbox
Inspection and repair on FLENDER GCH 1020 gearbox
The Netherlands
The Netherlands
February 2018
Inspection and repair on WGW gearbox

- Disassembly and assembly on location
- Disassembly, cleaning, inspection and assembly in shop GBS
- Test run including reporting in shop GBS
- Engineering
- Supply bearings, seals and various small materials
- Create a square set according to drawings
- Calculation of the gearbox by engineering
- Transport (collection and delivery)
WGW UNKNOWN
Inspection and repair on WGW gearbox
Inspection and repair on WGW gearbox
The Netherlands
The Netherlands
February 2018
Inspection and repair on RENK B34 / 76-M240 gearbox
RENK B34 / 76-M240
Inspection and repair on RENK B34 / 76-M240 gearbox
Inspection and repair on RENK B34 / 76-M240 gearbox
The Netherlands
The Netherlands
February 2018
Inspection and repair on SEW SA42eD17D4 gearbox
SEW SA42eD17D4
Inspection and repair on SEW SA42eD17D4 gearbox
Inspection and repair on SEW SA42eD17D4 gearbox
The Netherlands
The Netherlands
February 2018
Inspection and repair on ZPMC FH1690.21.C1B-00 gearbox
ZPMC FH1690.21.C1B-00
Inspection and repair on ZPMC FH1690.21.C1B-00 gearbox
Inspection and repair on ZPMC FH1690.21.C1B-00 gearbox
The Netherlands
The Netherlands
February 2018
Inspection and repair on FLENDER 118F - 13,5 gearbox

Here is an overview of the work performed on the gearbox for the drive extruder. The gearbox was already completely overhauled by GBS in 2012. During a recent visual inspection, steel particles were found in the filter. The customer has therefore decided to expand the gearbox during a planned stop and have GBS inspected in the workshop. Furthermore, no other complaints were reported to the gearbox in advance. All seals were preventively renewed, bearings only in case of doubt.

The cause of the metal particles in the oil has been found and remedied.

It is recommended to:

- Take oil samples every six months and have them analyzed
- Carry out a visua
FLENDER 118F - 13,5
Inspection and repair on FLENDER 118F - 13,5 gearbox
Inspection and repair on FLENDER 118F - 13,5 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on WGW KSHK 1330 S/So gearbox

- Cleaning, inspection and assembly
- Repair bearings, seals and various small materials
- Test run with test run protocol
- Internally update and externally scrape, sand, degrease and conserve the gearbox
- Transport the gearbox back to the client
WGW KSHK 1330 S/So
Inspection and repair on WGW KSHK 1330 S/So gearbox
Inspection and repair on WGW KSHK 1330 S/So gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on WGW KSHK 1330 S/So S/So gearbox

- Cleaning, inspection and assembly
- Renewing bearings, seals and various small materials
- Test run with test run protocol
- Update the gearbox internally and remove, sand, degrease and conserve externally
- Transport gearbox back to client
WGW KSHK 1330 S/So
Inspection and repair on WGW KSHK 1330 S/So S/So gearbox
Inspection and repair on WGW KSHK 1330 S/So S/So gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on WGW KSHK 1330 S/So gearbox

- Cleaning, inspection and assembly of the gearbox
- Renewing bearings, seals and various other small materials
- Test run with test run protocol
- Update the gearbox internally and remove, sand, degrease and conserve externally
- Transport of the gearbox back to the customer
WGW KSHK 1330 S/So
Inspection and repair on WGW KSHK 1330 S/So gearbox
Inspection and repair on WGW KSHK 1330 S/So gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on HURTH HKS A 18-292 gearbox

The disassembly of the coupling went without problems. The condition of the coupling is 0.34 mm. After cleaning all parts it appeared that the return channel of the labyrinth was closed with silicone sealant, see photo 4. The return hole ends in the lower bolt hole of the labyrinth lid (This hole continues into the gearbox)

The suspicion of GBS is that some silicone sealant has been sprayed into the relevant bolt hole to prevent leakage of the screw thread, but too much is used so that the sealant is pushed backwards and thus has blocked the return hole. In consultation with the customer, and by telephone with their client, it was decided to carefully open the threaded hole,
HURTH HKS A 18-292
Inspection and repair on HURTH HKS A 18-292 gearbox
Inspection and repair on HURTH HKS A 18-292 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on REXROTH GPV442.4 gearbox

Recommendations are:
-To perform an in-depth visual inspection of the planetary section of the gearbox in a wind situation that will allow manual pitching of the blades
v - To check the lubrication oil type and replace as stated in the last oil analysis report.
REXROTH GPV442.4
Inspection and repair on REXROTH GPV442.4 gearbox
Inspection and repair on REXROTH GPV442.4 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on REXROTH GPV442.4 gearbox

Recommendations are:
- To perform an in-depth inspection of the FE bearing of the generator by additional vibration measurements (after checking the grease supply to the bearing)
- To perform annual visual inspections and oil analyses.
REXROTH GPV442.4
Inspection and repair on REXROTH GPV442.4 gearbox
Inspection and repair on REXROTH GPV442.4 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on HANSEN EH854A-205 gearbox

This report shows the results of the visual inspection and vibration analysis on the Ghent Tower Automotive wind turbine. The customer has instructed GBS to visually record the condition of the gearbox. In addition, the data from the online SKF vibration monitoring system will be compared with data recorded on-site.
HANSEN EH854A-205
Inspection and repair on HANSEN EH854A-205 gearbox
Inspection and repair on HANSEN EH854A-205 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on BOGIE LB02 gearbox
BOGIE LB02
Inspection and repair on BOGIE LB02 gearbox
Inspection and repair on BOGIE LB02 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on WGW AA-SCZ-600/2/S gearbox

We recommended:
- In the short term, carry out an extensive inspection of the gearbox to determine the origin of the grit (by removing the top cover)
- Regardless of the result of the extensive inspection, the gearbox must be cleaned
- To refresh or filter the oil for reuse in order to remove any metal particles
- Perform a visual inspection and oil analysis annually.
WGW AA-SCZ-600/2/S
Inspection and repair on WGW AA-SCZ-600/2/S gearbox
Inspection and repair on WGW AA-SCZ-600/2/S gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on BUSS G-160 gearbox
BUSS G-160
Inspection and repair on BUSS G-160 gearbox
Inspection and repair on BUSS G-160 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on ASUG GVE 800x3,75-800x0,4 gearbox

This page presents the overhaul of the propulsion gearbox’ PTO shaft, on board a ship. GBS was invited to perform the overhaul, following the initial inspection by GBS. The overhaul of the PTO shaft as described in this report, was carried out successfully. Bearings were replace and axial clearance re-adjusted. A test-run was finally carried out, showing no abnormalities in vibration, sound and temperatures.

The repair of the gearbox should however be considered as a temporary solution. As of a consequence of the diagnosed bearing damage, both bearing pockets showed severe (old) rotation marks.

In order to guarantee proper operation of the gearbox, it is re
ASUG GVE 800x3,75-800x0,4
Inspection and repair on ASUG GVE 800x3,75-800x0,4 gearbox
Inspection and repair on ASUG GVE 800x3,75-800x0,4 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on BUSS G-160 gearbox

Recommendations

- Determine lubricating oil pressure at connection 12 on the gearbox
- Determine the exact lubricating oil quantity (l / min) for the relevant plain bearing
- Have the oil sample analyzed (for the determination of any wear particles).
It is also advisable to check the flow at the current lubrication oil supply with the current spare gearbox.

There is no further control on location, which results in the reduction of the flow. If the exact flow to this bearing is known, it must be decided whether this is sufficient for the proper functioning of the installation.
BUSS G-160
Inspection and repair on BUSS G-160 gearbox
Inspection and repair on BUSS G-160 gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on WGW KSHK 1330 S/So gearbox
WGW KSHK 1330 S/So
Inspection and repair on WGW KSHK 1330 S/So gearbox
Inspection and repair on WGW KSHK 1330 S/So gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on FLENDER NK NR SCH355/P/So gearbox
FLENDER NK NR SCH355/P/So
Inspection and repair on FLENDER NK NR SCH355/P/So gearbox
Inspection and repair on FLENDER NK NR SCH355/P/So gearbox
The Netherlands
The Netherlands
January 2018
Inspection and repair on FLENDER gearbox

Scope of work:

- Disassembly / assembly / test run / painting
- Work preparation / project management
- Engineering
- Supply of teeth parts + cabinet Flender
- Deliver and edit Flender link
- Supply of bearings
- Delivering various small materials
- Delivery of material 18CrNiMo7.6
- Measuring existing cupboard
- Clocks of existing output shaft
- Create steel filling ring
- Routing out bolt from lantern piece
- Adjusting the mounting ring lantern piece
FLENDER
Inspection and repair on FLENDER gearbox
Inspection and repair on FLENDER gearbox
The Netherlands
The Netherlands
December 2017
Inspection and repair on PIV gearbox
PIV UNKNOWN
Inspection and repair on PIV gearbox
Inspection and repair on PIV gearbox
The Netherlands
The Netherlands
December 2017
Inspection and repair on TGW KBN-200 gearbox

Scope of work:

- Disassembly, cleaning and inspection
- Overhaul of the gearbox
- Assembly and adjustment
- Test run with reporting
TGW KBN-200
Inspection and repair on TGW KBN-200 gearbox
Inspection and repair on TGW KBN-200 gearbox
The Netherlands
The Netherlands
December 2017
Inspection and repair on WGW KSHK 1330 S/So gearbox

Scope of work:

- Cleaning, inspection and assembly
- Renewing bearings, seals and various small materials
- Test run with test run protocol
- Update the gearbox internally and remove, sand, degrease and conserve externally
- Transport
Additional work following from inspection:

- Applying oversized dowel pins.
- The mechanical minimum clean-up of distance rings and spacer for renewal of the conical pinion shaft
- Inbound conical pinion shaft for pre-machining, capping and naming the seal
- Manually check inside gear teeth
- Offset hollow shaft (pos.9) in connection with seal on both sides, material 42CrMo4
- Renov
WGW KSHK 1330 S/So
Inspection and repair on WGW KSHK 1330 S/So gearbox
Inspection and repair on WGW KSHK 1330 S/So gearbox
The Netherlands
The Netherlands
December 2017
Inspection and repair on WGW KSHK 1330 S/So gearbox

Scope of work:

- Cleaning, inspection and assembly
- Renewing bearings, seals and various small materials
- Test run with test run protocol
- Update the gearbox internally and remove, sand, degrease and conserve externally
- Transport (delivery)
WGW KSHK 1330 S/So
Inspection and repair on WGW KSHK 1330 S/So gearbox
Inspection and repair on WGW KSHK 1330 S/So gearbox
The Netherlands
The Netherlands
December 2017

Pagina:
Previous 1 2 3 4 5 ... 33 Next