GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline
GBS Gearbox Services international

Global Activities

Our activities in the Netherlands

Our headquarters are located in The Netherlands and we serve a lot of clients in our own country. On this page a selection of gearbox projects done in The Netherlands are included. More information about the project can be viewed by clicking on the links listed below.

Pagina:
Previous 1 ... 3 4 5 6 7 ... 33 Next

Inspection and repair on ZF RSD 601 gearbox
ZF RSD 601
Inspection and repair on ZF RSD 601 gearbox
Inspection and repair on ZF RSD 601 gearbox
The Netherlands
The Netherlands
September 2017
Inspection and repair on ZPMC NFH1610.28.C3B-00 gearbox
ZPMC FH1610.28.C3B-00
Inspection and repair on ZPMC NFH1610.28.C3B-00 gearbox
Inspection and repair on ZPMC NFH1610.28.C3B-00 gearbox
The Netherlands
The Netherlands
September 2017
We got invited to do an inspection on a leaking gearbox in a wind turbine.

In case that the leakage is still not solved, it may take some time for the chamber on the hub side to be filled with oil again. It is therefore recommended to:

- Check the wind turbine for oil leakage again after a couple of days / after a week
- Keep inspecting the wind turbine for oil leakage for some time

If no leakage is observed after this period then the problem is solved. It has also been noted that the pitch pipe is not in line with the hollow shaft through the gearbox, it seems to be rubbing on the bottom of the hollow shaft (see appendix A, pictures 4 and 5). The pitch cilinder was also not in line with the pitch pipe. It is th
FLENDER PEAK 4280
gearbox-repair/flender/flender-peak-4280-108581.php
gearbox-repair/flender/flender-peak-4280-108581.php
The Netherlands
The Netherlands
September 2017
Inspection and repair on RENK gearbox

Scope of work:

- Replacement of input and output shaft;
- Replacement of radial and axial bearings;
- Check of the axial clearance of all bearings;
- Assembly of the gearbox;
- Replacement of input and output shaft
- Balancing of the output shaft with new torn carrier.
- Replacement of input shaft radial and axial bearings.
- Make a blue print of the new bearings. These were found acceptable.
- Replacement of output shaft radial and axial bearings.
- Make a blue print of the new bearings. These were found acceptable.
- Adjustment of axial clearance input and output shaft by grinding the distance ring behind the axial bearings.
RENK UNKNOWN
Inspection and repair on RENK gearbox
Inspection and repair on RENK gearbox
The Netherlands
The Netherlands
September 2017
Inspection and repair on SEW R97 AM160/II2GD gearbox
SEW R97 AM160/II2GD
Inspection and repair on SEW R97 AM160/II2GD gearbox
Inspection and repair on SEW R97 AM160/II2GD gearbox
The Netherlands
The Netherlands
September 2017
Inspection and repair on PIV PLC18-R11-G11-18 gearbox

Scope of work:

- Disassembly, cleaning and inspection
- Replacing bearings, seals and various small materials
- The renewal of various small materials such as gaskets, fasteners, etc.
- Assembly and adjustment
- Prepare the test stand, set up the gearbox, fill it with oil and test it for 4 hours without load
- External gear unit, degreasing, scraping, sanding and preserving in a 2-layer paint system in the existing color.
- Shipping the gearbox back to the client
PIV PLC18-R11-G11-18
Inspection and repair on PIV PLC18-R11-G11-18 gearbox
Inspection and repair on PIV PLC18-R11-G11-18 gearbox
The Netherlands
The Netherlands
September 2017
Inspection and repair on PIV PLC18-R11-G11-18 gearbox

Scope of work:

- Disassembly, cleaning and inspection
- Replacing bearings, seals and various small materials
- The renewal of various small materials such as gaskets, fasteners, etc
- Assembly and adjustment
- Prepare the test stand, set up the gearbox, fill it with oil and test it for 4 hours without load
- Shipped the gearbox back to the client
PIV PLC18-R11-G11-18
Inspection and repair on PIV PLC18-R11-G11-18 gearbox
Inspection and repair on PIV PLC18-R11-G11-18 gearbox
The Netherlands
The Netherlands
September 2017
Inspection and repair on PHB KSZg 355 Pu gearbox

Scope of work:

- Release the gearbox
- Renew frost ring and oil seal and possibly ina - ring
- Mount the incoming coupling on site (burner set required).
- Re-align the gearbox
PHB KSZg 355 Pu
Inspection and repair on PHB KSZg 355 Pu gearbox
Inspection and repair on PHB KSZg 355 Pu gearbox
The Netherlands
The Netherlands
September 2017
Inspection and repair on FLENDER T1FL-30 gearbox

We did an inspection on this gearbox and advised the client to do an overhaul, consisting of:

- Disassembly,
- Replacement of all bearings,
- Replacement of all seals
FLENDER T1FL-30
Inspection and repair on FLENDER T1FL-30 gearbox
Inspection and repair on FLENDER T1FL-30 gearbox
The Netherlands
The Netherlands
September 2017
Inspection and repair on SUMITOMO MHI PHA-9040-R3-RJLT-25 gearbox

Scope of work:

- Disassembly, cleaning and inspection
- Replacing bearings, seals and various small materials
- Assembly and adjustment
- Test run with reporting
SUMITOMO MHI PHA-9040-R3-RJLT-25
Inspection and repair on SUMITOMO MHI PHA-9040-R3-RJLT-25 gearbox
Inspection and repair on SUMITOMO MHI PHA-9040-R3-RJLT-25 gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on WGW SC-1 gearbox

Scope of work:

- Disassembly, cleaning and inspection (2 gearboxes)
- Revision activities and deliveries
- Assembly and adjustment
- Test run with reporting
WGW SC-1
Inspection and repair on WGW SC-1 gearbox
Inspection and repair on WGW SC-1 gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on KUYPERS Koppeling gearbox
KUYPERS Koppeling
Inspection and repair on KUYPERS Koppeling gearbox
Inspection and repair on KUYPERS Koppeling gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on SEW R93WD-132ML4 gearbox
SEW R93WD-132ML4
Inspection and repair on SEW R93WD-132ML4 gearbox
Inspection and repair on SEW R93WD-132ML4 gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on FLENDER KBH 400/S/So gearbox
FLENDER KBH 400/S/So
Inspection and repair on FLENDER KBH 400/S/So gearbox
Inspection and repair on FLENDER KBH 400/S/So gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on 134-3675 Drive GP gearbox
UNKNOWN 134-3675 Drive GP
Inspection and repair on 134-3675 Drive GP gearbox
Inspection and repair on 134-3675 Drive GP gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on FLENDER FZH 100K gearbox
FLENDER FZH 100K
Inspection and repair on FLENDER FZH 100K gearbox
Inspection and repair on FLENDER FZH 100K gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on LEROY-SOMER MVA M53 G gearbox

Scope of work:

- Disassembly, cleaning, inspection
- Assembly and adjustment
- Engineering (drawing)
- Work preparation
- Delivery of bearings
- Renewal of worm gear
- Renewal of output shaft
LEROY-SOMER MVA M53 G
Inspection and repair on LEROY-SOMER MVA M53 G gearbox
Inspection and repair on LEROY-SOMER MVA M53 G gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on Flender B3-SV-7A gearbox
FLENDER B3-SV-7A
Inspection and repair on Flender B3-SV-7A gearbox
Inspection and repair on Flender B3-SV-7A gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on FLENDER KDN-180 gearbox

Scope of work:

- Disassembly, cleaning and inspection
- Assembly of the gearbox and adjustment
- Test run with reporting
FLENDER KDN-180
Inspection and repair on FLENDER KDN-180 gearbox
Inspection and repair on FLENDER KDN-180 gearbox
The Netherlands
The Netherlands
August 2017
Inspection and repair on Siemens K7371-4 gearbox
SIEMENS K7371-4
Inspection and repair on Siemens K7371-4 gearbox
Inspection and repair on Siemens K7371-4 gearbox
The Netherlands
The Netherlands
July 2017
Inspection and repair on FLENDER B3-SV-7A gearbox

- Disassembly, cleaning and inspection
- Bearings and seals renew
- Assembly and adjustment
- Test run with reporting
- To store the gearbox externally in a 2-layer system
- Checking the tearing for cracks
- Checking cabinet, bores (bearings) on boring table
- Cabinet, control surface and reaction plate on boring table
FLENDER B3-SV-7A
Inspection and repair on FLENDER B3-SV-7A gearbox
Inspection and repair on FLENDER B3-SV-7A gearbox
The Netherlands
The Netherlands
July 2017
Inspection and repair on KUMERA RD-4630-L-E1 gearbox.

Scope of work:
- Disassembly, cleaning and inspection of the gearbox
- Check interior for cracks
- Replacing bearings and seals
- Test run with reporting
KUMERA RD-4630-L-E1
Inspection and repair on KUMERA RD-4630-L-E1 gearbox
Inspection and repair on KUMERA RD-4630-L-E1 gearbox
The Netherlands
The Netherlands
July 2017
Inspection and repair on Exchange bearings gearbox.

Scope of work:

- Inspection of IMS-shaft and PTO-shaft;
- Replacement of bearings and seal (PTO-shaft);
- Assembly of the PTO-shaft;
- Check of the backlash of gears (PTO-shaft and IMS-shaft);
- Alignment check;
- Test run of the gearbox
GBS UNKNOWN
Inspection and repair on Exchange bearings gearbox
Inspection and repair on Exchange bearings gearbox
The Netherlands
The Netherlands
July 2017
Inspection and repair on M.A.N. FLV 5.280x24,61 gearbox
M.A.N. FLV 5.280x24,61
Inspection and repair on M.A.N. FLV 5.280x24,61 gearbox
Inspection and repair on M.A.N. FLV 5.280x24,61 gearbox
The Netherlands
The Netherlands
July 2017
Inspection and repair on M.A.N. Gr.2070 / 2060 gearbox
M.A.N. Gr.2070 / 2060
Inspection and repair on M.A.N. Gr.2070 / 2060 gearbox
Inspection and repair on M.A.N. Gr.2070 / 2060 gearbox
The Netherlands
The Netherlands
July 2017

Pagina:
Previous 1 ... 3 4 5 6 7 ... 33 Next