Global Activities
Our activities in Belgium
On this page you will find a selection of the projects we have done in Belgium. Since Belgium is only a few hours away from our headquarters in The Netherlands, we have done a lot of projects in this country. By clicking on one of the links below you can view the details of the project.
Belgium
January 2013
Belgium
January 2013
Disassembling of the top cover
- Fixating of the output spline shafts per fixing plate.
- The serrations with reference to eachother.
Inside of the gear case
- In the inside of the gear casing were found metal particles from the broken tooth.
Belgium
January 2013
Belgium
December 2012
Belgium
December 2012
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
Belgium
November 2012
Belgium
November 2012
Belgium
November 2012
Belgium
October 2012
Belgium
October 2012
The conversion operations consists of:
- Performing a visual inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
Belgium
October 2012
Belgium
September 2012
Belgium
September 2012
Belgium
September 2012
Belgium
August 2012
Belgium
August 2012
Belgium
August 2012
Belgium
August 2012
Belgium
July 2012
Belgium
July 2012
Belgium
July 2012
Belgium
June 2012
Belgium
June 2012
Belgium
June 2012
Belgium
June 2012
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
VALMET UNKNOWN
Belgium
January 2013
Revisionconstruction and supply comprehensive:
- Disassembling, cleaning and inspection of the gearbox.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling, cleaning and inspection of the gearbox.
- Inspection of all parts of the gearbox:
VALMET UNKNOWN
Belgium
January 2013
- The serrations with reference to eachother.
FLENDER ZE-90
Belgium
January 2013
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
VALMET L500-2
Belgium
December 2012
On site inspection on gearbox of Hansen.
One gear was broken, we repaired the damage.
We also found that one oil pump was leaking.
We renewed it and the gearbox was repaired.
One gear was broken, we repaired the damage.
We also found that one oil pump was leaking.
We renewed it and the gearbox was repaired.
HANSEN RNF24-BNN-12,5
Belgium
December 2012
- Deploying of the inspection report.
- Stop point.
MAAG Gs-22
Belgium
November 2012
Standard overhaul:
Disassembling, cleaning and inspection.
Checking for any leakage, tears or damages.
The shaft was slightly damaged, so we repaired it.
Disassembling, cleaning and inspection.
Checking for any leakage, tears or damages.
The shaft was slightly damaged, so we repaired it.
PHILADELPHIA 8HP-1
Belgium
November 2012
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
ROSSI MRIV-250U02A
Belgium
November 2012
Inspection on gearbox Guida Impianti. Our findings were
reported to our client. The damage on this gearbox was repaired.
See our pictures on the left and here below.
reported to our client. The damage on this gearbox was repaired.
See our pictures on the left and here below.
GUIDA IMPIANTI Unknown
Belgium
October 2012
Inspection on gearbox Guida Impianti.
Our findings were reported to our client.
The damage on this gearbox was repaired.
Seals and bearings were renewed.
Our findings were reported to our client.
The damage on this gearbox was repaired.
Seals and bearings were renewed.
GUIDA IMPIANTI 2737
Belgium
October 2012
- Performing of the repair constructions.
- Deploying of the inspection report.
FLENDER GRAFFENSTADEN TX61 / 1CV
Belgium
October 2012
Disassembling, cleaning and inspection on gearbox FLENDER Z-101-KM.
Performing an inspection report.
Performing an inspection report.
FLENDER Z-101-KM
Belgium
September 2012
Performing:
Disassembling, cleaning and inspection on gearbox FLENDER Z-101-KM.
Making a complete inspection report for our client.
Disassembling, cleaning and inspection on gearbox FLENDER Z-101-KM.
Making a complete inspection report for our client.
FLENDER Z-101-KM
Belgium
September 2012
Disassembling, cleaning and inspecting on gearbox VALMET S1B-200-EA.
This gearbox wasn't working the right way, so inspection was needed.
All our findings were reported to our client.
This gearbox wasn't working the right way, so inspection was needed.
All our findings were reported to our client.
VALMET S1B-200-EA
Belgium
September 2012
On gearbox Pekrun ASR 160 we performed a revision.
Drawing the inside.
Disassembling and cleaning the gearbox.
Inspection and report our findings to our client.
Drawing the inside.
Disassembling and cleaning the gearbox.
Inspection and report our findings to our client.
PEKRUN ASR 160
Belgium
August 2012
Our engineers performed an inspection on the gearbox
We disassembled and cleaned the gearbox.
Founding that the bearings were damaged.
Renewed the bearings and sealings.
Assembling the gearbox again and made a test run.
We disassembled and cleaned the gearbox.
Founding that the bearings were damaged.
Renewed the bearings and sealings.
Assembling the gearbox again and made a test run.
PEKRUN ASR 160
Belgium
August 2012
Performing:
Disassembling, cleaning and inspection on gearbox VALMET S1B-200-EA.
Complete inspection with inspection report for our client.
Disassembling, cleaning and inspection on gearbox VALMET S1B-200-EA.
Complete inspection with inspection report for our client.
VALMET S1B-200-EA
Belgium
August 2012
We performed our repairing work according to the inspection report.
Disassembling, cleaning and inspecting all of the gearbox parts.
We renewed all bearings and sealings of gearbox VALMET S1B-200-EA.
Painting the gearbox in the color our client likes.
Disassembling, cleaning and inspecting all of the gearbox parts.
We renewed all bearings and sealings of gearbox VALMET S1B-200-EA.
Painting the gearbox in the color our client likes.
VALMET S1B-200-EA
Belgium
August 2012
- Disassembling and cleaning the gearbox.
- Performing an visual inspection with endoscope on gearbox Keller.
- Report our findings and assembling the gearbox again.
- Performing an visual inspection with endoscope on gearbox Keller.
- Report our findings and assembling the gearbox again.
KELLER S2S III H450
Belgium
July 2012
Our client told us this gearbox VALMET S1B-200-EA had structural problems.
We found this gearbox was leaking.
So we started performing measurement onsite.
We did repair the parts and performed a test run for a final check.
We found this gearbox was leaking.
So we started performing measurement onsite.
We did repair the parts and performed a test run for a final check.
VALMET S1B-200-EA
Belgium
July 2012
Revision of the gearbox and making a complete new gear set.
Revision includes:
Disassembling, cleaning and inspection.
Making an inspection report for our client.
Assembling and adjusting the gearbox.
Revision includes:
Disassembling, cleaning and inspection.
Making an inspection report for our client.
Assembling and adjusting the gearbox.
JAHNEL KESTERMANN G2400 / A565
Belgium
July 2012
Disassembling of gearbox WGW SBHN 6,5 onsite.
The pinion was damaged, we had to repair it.
We transported the damaged pinion to our workshop for inspection.
We were able to repair the damage and the new pinion
was send back to our client.
The pinion was damaged, we had to repair it.
We transported the damaged pinion to our workshop for inspection.
We were able to repair the damage and the new pinion
was send back to our client.
WGW SBHN 6,5
Belgium
June 2012
On gearbox SEW RF100-L6200 we performed a complete inspection.
First we disassembled and cleaned the gearbox. After that
we were able to inspect all parts. The bearings and sealings
had to be renewed. We renewed them and performed a test run
with a test run report.
First we disassembled and cleaned the gearbox. After that
we were able to inspect all parts. The bearings and sealings
had to be renewed. We renewed them and performed a test run
with a test run report.
SEW RF100-L6200
Belgium
June 2012
Gearbox was leaking oil.
Proceedings:
Disassembling and cleaning gearbox Nord SK 180 X/4 RIS.
Inspection and reporting to our client.
We repaired the damage and assembled the gearbox.
Proceedings:
Disassembling and cleaning gearbox Nord SK 180 X/4 RIS.
Inspection and reporting to our client.
We repaired the damage and assembled the gearbox.
NORD SK 180 X/4 RIS
Belgium
June 2012
Performing visual inspections on different gearboxes.
The inspections were performed at our customer.
The inspections were performed at our customer.
Toho Seisakusho ZMPZ-750B
Belgium
June 2012