GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline
GBS Gearbox Services international

Global Activities

Our activities Africa / Middle East

Here below are shown some of the countries in which we have worked:
Luanda, Angola
Hurgada, Egypt
Bogoso, ghana
Zambia
Ashkelon, israel
Kuwait, Kuwait
Batroun, libanon
Marsa el Brega, libia
Valletta, Malta
Mohammedia, Marocco
Cape town, South Africa
Quatar
Mossel bay, South Africa
Dubai
Oman
Dibba - UAE
Durban, South Africa
Teheran, Iran
Mashhad, Iran
TANZANIA
Dubai - UAE
Oman
Projects last 6 months
Projects more then 6 months
Projects in progress NOW
Update 22-5-2014
The list below shows a selection of the projects we have done, sorted by country:

Pagina:
1

Angola
Angola
Two complete gearboxes disassembled in Ghana (Africa).
We had to inspect and repair the inner shaft of the gearbox.
JAHNEL KESTERMANN DP-A1S940-3S
Disassembling and repair of two gearboxes Jahnel Kestermann DP-A1S940-3S
Disassembling and repair of two gearboxes Jahnel Kestermann DP-A1S940-3S
Ghana
Ghana
October 2011
Supply of bearings and seals of gearbox Flender DMGH 25.4 to Kuwait.
FLENDER DMGH 25.4
Supply of bearings and seals of gearbox Flender DMGH 25.4
Supply of bearings and seals of gearbox Flender DMGH 25.4
Kuwait
Kuwait
September 2012
  • The conversion operations consists of:
  • - Performing of an alignment check on the dredge pump gearbox on location.
      For the alignment check, a laser shaft alignment system was used.
      With this system, the alignment of equipment can be measured accurately.
    - Deploying of the inspection report.
    JAHNEL KESTERMANN DP-A1S940-3S-00
    Alignment and control of clutch
    Alignment and control of clutch
    Nigeria
    Nigeria
    January 2013
    Inspection and Repair of an Renk Gearbox
    RENK TACKE HSU 800D
    Inspection and temporary repair of an Renk Gearbox
    Inspection and temporary repair of an Renk Gearbox
    Nigeria
    Nigeria
    December 2012
    Our engineer went to Nigeria for inspection of the gearbox.
    We found that the friction plates had te be renewed.
    Our findings were reported to our client and we renewed plates.
    FLENDER SV-355-C
    Renewing of the friction plates on gearbox type SV-355-C in Nigeria
    Renewing of the friction plates on gearbox type SV-355-C in Nigeria
    Nigeria
    Nigeria
    August 2012
  • The conversion operations consists of:
  • - Disassembling, cleaning and inspection of the gearbox.
    - Performing of the repair constructions.
    - Deploying of the inspection report.
    FLENDER B3 DH 10 C
    Making a new hollow shaft on a Flender B3 DH 10 C gearbox
    Making a new hollow shaft on a Flender B3 DH 10 C gearbox
    Senegal
    Senegal
    August 2013
    - Inspection, assembly including testing in 7 days with local assistance.
    - The Gearbox with input and output shafts are still in position on ship.
    - Clutch units are in an local workshop. These have to be repaired and fitted to the gearbox on board the ship.
    KUYPERS 54000
    Inspection and repair of gearbox of brand Kuypers
    Inspection and repair of gearbox of brand Kuypers
    South Africa
    South Africa
    January 2010
    Inspection of gearbox of brand KRUPP in Tanzania. Our customer has repaired the pinion shaft of the gearbox. The repaired pinion bearings temperature was raising to 90 degree centigrade and also running with high vibration. Our customer asked to inspect the gearbox to report its condition.
    KRUPP SN11/1400/9
    Inspection of gearbox of brand KRUPP
    Inspection of gearbox of brand KRUPP
    Tanzania
    Tanzania
    March 2011
    Overhaul of complete broken gearbox. New internals in 2.5 week time.
    FLENDER H2SH SIZE 24
    Overhaul of gearbox of brand FLENDER
    Overhaul of gearbox of brand FLENDER
    Zambia
    Zambia
    June 2010

    Pagina:
    1