Global Activities

We performed an inspection on gear motor Nord.
First stap: disassembling, cleaning and inspection on gear motor.
Second we make a complete inspection report.
The repair proceedings were performed according to the inspection report.
We renewed the sealing and bearings.

Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.

Performing an inspection and overhaul of gearbox.

Performing an inspection and overhaul of gearbox.

- Disassembling, cleaning and inspection on gearbox Lohmann & Stolterfoht GUU-160A/1400.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.

Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.

Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.

Disassembling, cleaning and inspection on gearbox Jahnel Kestermann CSBV 225L.
Preparing inspection report for our client.

- Disassembly, cleaning and inspection of gearbox.
- Preparing an inspection report and preform overhaul of gearbox.

Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.

- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.

Inspection and overhaul of gearbox of brand CMI / DE MALZINE.

Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.

Gearbox Services International was invited to establish the condition of the gearbox, in order to assess which parts can be salvaged, as well as to compile a scope of repair for bringing the gearbox back into service. During the inspection, the gearbox was completely dismantled.

Inspection and overhaul of gearbox of brand Conrad Stork.

Vibration measurement, visual inspection with the endoscope and reporting Booster pump for a dredging vessel.

- Overhaul proposal and supplies:
- Carrying out the repair as described in our inspection report.
- The replacement of the bearings, seals and overhaul of the mechanical seal (to be determined), supply GBS Gearbox Services International.
- The renewal of various packing material like small fasteners, etc., supply GBS Gearbox Services International.
- Modification of the input shaft E-motor / gearbox according to the attached proposal with our drawing number SB93305-100.
- Renewing the E-motor, pre-consult with the customer specifications.
- The refitting the gearbox.
- If necessary, the surfaces of the lower lids due axial bearing clearances.
- Checking the supporting images and side clearances.
- Full

- Disassembly, cleaning and inspection of gearbox.
- Going through the inspection report.
- Overhaul of gearbox.

- Disassembling, cleaning and inspection on gearbox Kumera LCM-3355.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.

- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.

- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.

- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.
- Overhaul on gearbox.

- Removing, cleaning and inspecting the gearbox.
- Gearbox housing was cracked > repaired by clamping of the cracks.
- Renewing the bearings and seals.
- Assembly and test run.

- Disassembly, cleaning and inspection on gearbox SAWA V2000 / 31,5L.
- Going through the inspection report.
- Overhaul on the gearbox.

- Disassembling, cleaning and inspection on gearbox SCHARPEGGE-394470.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.