Our activities in Bulk & Container Handling
Overview of our gearbox inspection and repair projects in the Bulk & Container Handling Industry
The Bulk & Container Handling Industry is an important industry for us. Since we are located in The Netherlands near Rotterdam, we do a lot of project for the port of Rotterdam. On this page will find a collection of projects we have done in this industry. By clicking on one of the links below, you can see the details of the project.
The Netherlands
September 2011
Sweden
September 2011
The Netherlands
September 2011
The Netherlands
September 2011
The Netherlands
September 2011
Belgium
August 2011
The Netherlands
August 2011
The Netherlands
August 2011
The Netherlands
August 2011
The Netherlands
August 2011
The Netherlands
August 2011
The Netherlands
June 2011
The Netherlands
May 2011
Belgium
March 2011
The Netherlands
March 2011
Belgium
February 2011
Albania
February 2011
The Netherlands
January 2011
The Netherlands
January 2011
The Netherlands
November 2010
The Netherlands
October 2010
The Netherlands
October 2010
The Netherlands
October 2010
The Netherlands
September 2010
The Netherlands
September 2010
Disassembling, cleaning and inspection of gearbox Santasalo.
Making a complete inspection report. We renewed the bearings
and sealings. Performing a test run with a test run report for our client.
Making a complete inspection report. We renewed the bearings
and sealings. Performing a test run with a test run report for our client.
SANTASALO 3TKC180NE
The Netherlands
September 2011
- Inspected gearbox Flender B4-HV-12D in Sweden.
- Broaching the cupboard housing.
- Assembling the gearbox and send it to our client.
- Broaching the cupboard housing.
- Assembling the gearbox and send it to our client.
FLENDER B4-HV-12D
Sweden
September 2011
Exchanging complete gearbox DEMAG 20Zw / KF onsite.
We also have aligned the gearbox.
We also have aligned the gearbox.
DEMAG 20Zw / KF
The Netherlands
September 2011
Performing inspection and revision:
- Disassembling, cleaning and inspection.
- Making an inspection report.
- Disassembling, cleaning and inspection.
- Making an inspection report.
DEMAG 20Zw / KF
The Netherlands
September 2011
Performing an inspection and revision on gearbox Demag 20Zw / KF.
DEMAG 20Zw / KF
The Netherlands
September 2011
Performing a visual inspection on gearbox DEMAG HVK32-2.
DEMAG HVK32-2
Belgium
August 2011
We disassembled, cleaned and inspected gearbox Hansen D-623.
After inspecting we made an inspection report.
It was necessary to renew all bearings and sealings.
At last, we performed a test run with a test run report.
After inspecting we made an inspection report.
It was necessary to renew all bearings and sealings.
At last, we performed a test run with a test run report.
HANSEN D-623
The Netherlands
August 2011
Disassembling, cleaning and inspecting the gear motor.
Making a complete inspection report.
We repaired the gear motor according to our revision proposal.
This includes: repairing of the sealings and bearings.
At the end we made a test run.
Making a complete inspection report.
We repaired the gear motor according to our revision proposal.
This includes: repairing of the sealings and bearings.
At the end we made a test run.
Motox Z8
The Netherlands
August 2011
Our work:
We first disassembled gearbox Lohmann & Stolterfoht onsite.
It was necessary to make a visual inspection, so we transported it to our workshop.
We performed a visual inspection with our endoscope.
All our findings were reported in an inspection report for our client.
We first disassembled gearbox Lohmann & Stolterfoht onsite.
It was necessary to make a visual inspection, so we transported it to our workshop.
We performed a visual inspection with our endoscope.
All our findings were reported in an inspection report for our client.
LOHMANN & STOLTERFOHT PLANETAIRE
The Netherlands
August 2011
We performed an inspection on gear motor Nord.
First stap: disassembling, cleaning and inspection on gear motor.
Second we make a complete inspection report.
The repair proceedings were performed according to the inspection report.
We renewed the sealing and bearings.
First stap: disassembling, cleaning and inspection on gear motor.
Second we make a complete inspection report.
The repair proceedings were performed according to the inspection report.
We renewed the sealing and bearings.
NORD UNKNOWN
The Netherlands
August 2011
Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.
TGW 225-P-ML-TP
The Netherlands
August 2011
Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.
MARLEY 22.2
The Netherlands
June 2011
Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.
ZOLLERN ZHP-3.25-L-Ex
The Netherlands
May 2011
- Disassembling, cleaning and inspection on gearbox Flender SKBA-90.
- Reporting and making a revision proposal.
- Assembling revision accordingn to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling revision accordingn to revision proposal.
- Performing a test run with a test run report.
FLENDER SKBA 900
Belgium
March 2011
Inspection and overhaul of gearbox of brand Conrad Stork.
CONRAD STORK UNKNOWN
The Netherlands
March 2011
- Performing an inspection on gearbox Flender DSE-2.95
- Analyzing and reporting.
- Giving advice to our client by performing disassembling.
- Analyzing and reporting.
- Giving advice to our client by performing disassembling.
FLENDER DSE 2.95
Belgium
February 2011
- Inspecting or checking of the axial pads and on height scraping.
- The on-site help to install and adjust the axial pads.
- The on-site help to complete alignment of the installation.
- The on-site help to install and adjust the axial pads.
- The on-site help to complete alignment of the installation.
KUYPERS 6010
Albania
February 2011
- Disassembling, cleaning and inspection on gearbox Kumera LCM-3355.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
KUMERA LCM3355
The Netherlands
January 2011
- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.
- Preparing inspection report.
MOVENTAS M3-RHF-70
The Netherlands
January 2011
- Removing, cleaning and inspecting the gearbox.
- Gearbox housing was cracked > repaired by clamping of the cracks.
- Renewing the bearings and seals.
- Assembly and test run.
- Gearbox housing was cracked > repaired by clamping of the cracks.
- Renewing the bearings and seals.
- Assembly and test run.
METSO 3TKC180NE
The Netherlands
November 2010
- Removing, cleaning and inspecting the gearbox.
- Repair of the gearbox and testrun.
- Repair of the gearbox and testrun.
BHS TG 28
The Netherlands
October 2010
- Removing, cleaning and inspecting the gearbox.
- Repair and test-run.
- Repair and test-run.
ROSSI RC-21-180-UO2A
The Netherlands
October 2010
- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.
- Full repair and test run.
- Preparing inspection report.
- Full repair and test run.
SANTASALO 3TKC180 NE
The Netherlands
October 2010
-Reporting and making a revision proposal.
- Assembling revision according to revision poposal.
- Performing a test run with a test run report.
- Assembling revision according to revision poposal.
- Performing a test run with a test run report.
KUMERA RB 3355
The Netherlands
September 2010
- Full inspection of damaged gearbox.
- Complete repair of this gearbox including test run.
- Complete repair of this gearbox including test run.
BIERENS 26 Spec
The Netherlands
September 2010