Our activities in the Energy Industry
Presentation of our Energy Industry projects
On this page we have presented a selection of the projects we have done in the Energy Industry. Our engineers are flying all over the world. If you click on a link listed below, you will be taken to the project page where all details and pictures of the project can be found.
The Netherlands
May 2017
We performed an inspection and revision on FLENDER gearbox B2-SV-04A.
The Netherlands
October 2016
We performed an inspection and revision on FLENDER gearbox KBH P2SB-22.
Belgium
October 2016
We performed an inspection and revision on FLENDER gearbox PEAK 4280.
The Netherlands
September 2016
We performed an inspection and repair on a gearbox BIERENS K2-A3-55
The Netherlands
August 2016
We performed repair on a gearbox Brook Hansen EH553 AK 21-BN-62.
The Netherlands
August 2016
We performed repair on a gearbox TGW gearbox repair AW SCN 560/W3/S.
The Netherlands
August 2016
We performed an inspection and repair on a gearbox VALMET S2GH-451X.
The Netherlands
August 2016
We performed an inspection and repair on a gearbox VALMET S2GH-451X.
The Netherlands
August 2016
We performed an inspection and revision on gearbox AUMA GS200GZ16LR.
The conversion operations consists of:
Performing of a visual inspection of the gearbox.
Deploying of the inspection report.
The Netherlands
July 2016
We performed an inspection and revision on gearbox AUMA GS200GZ16LR.
The conversion operations consists of:
Performing of a visual inspection of the gearbox.
Deploying of the inspection report.
The Netherlands
July 2016
We performed an inspection and revision on gearbox BHS RTP-53K.
Belgium
May 2016
We performed an inspection and revision on FLENDER gearbox SZAK 2425.
The Netherlands
January 2016
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Controlling the gearings for bursts by means of magnafluxing.
The Netherlands
January 2014
The conversion operations consists of:
- Performing of an alignment check before dismantling.
- Complete inspection of the gearbox.
- Deploying of the inspection report and measurement protocol.
Belgium
January 2014
Singapore
December 2013
The conversion operations consists of:
- Performing of a visual inspection of the Flender Graffenstaden gearbox.
- Performing of the repair constructions on location.
- Deploying of the inspection report.
Belgium
October 2013
The conversion operations consists of:
- Disassembling the complete gearbox from the platform.
- Transporting to our workshop.
- Performing of the repair constructions.
Singapore
August 2013
The conversion operations consists of:
- Disassembling the complete gearbox from the platform.
- Transporting to our workshop.
- Performing of the repair constructions.
Singapore
August 2013
The conversion operations consists of:
- Disassembling the complete gearbox from the platform.
- Transporting to our workshop.
- Performing of the repair constructions.
Singapore
August 2013
The conversion operations consists of:
- Disassembling the complete gearbox from the platform.
- Transporting to our workshop.
- Performing of the repair constructions.
Singapore
August 2013
The conversion operations consists of:
- Transporting to our workshop.
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
Singapore
August 2013
The conversion operations consists of:
- Transporting to our workshop.
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
Singapore
August 2013
The conversion operations consists of:
- Disassembling the complete gearbox from the platform.
- Transporting to our workshop.
- Performing of the repair constructions.
Singapore
August 2013
The conversion operations consists of:
- Disassembling the complete gearbox from the platform.
- Transporting to our workshop.
- Performing of the repair constructions.
Singapore
August 2013
We performed an inspection and revision on FLENDER gearbox.
FLENDER PEAS 4280,1
The Netherlands
May 2017
We performed an inspection and revision on FLENDER gearbox B2-SV-04A.
FLENDER B2-SV-04A
The Netherlands
October 2016
We performed an inspection and revision on FLENDER gearbox KBH P2SB-22.
FLENDER P2SB-22 (planetair)
Belgium
October 2016
We performed an inspection and revision on FLENDER gearbox PEAK 4280.
FLENDER PEAK 4280
The Netherlands
September 2016
We performed an inspection and repair on a gearbox BIERENS K2-A3-55
BIERENS K2-A3-55
The Netherlands
August 2016
We performed repair on a gearbox Brook Hansen EH553 AK 21-BN-62.
HANSEN EH553 AK 21-BN-62
The Netherlands
August 2016
We performed repair on a gearbox TGW gearbox repair AW SCN 560/W3/S.
TGW AW SCN 560/W3/S
The Netherlands
August 2016
We performed an inspection and repair on a gearbox VALMET S2GH-451X.
VALMET S2GH-451X
The Netherlands
August 2016
We performed an inspection and repair on a gearbox VALMET S2GH-451X.
VALMET S2GH-451X
The Netherlands
August 2016
We performed an inspection and revision on gearbox AUMA GS200GZ16LR.
The conversion operations consists of:
Performing of a visual inspection of the gearbox.
Deploying of the inspection report.
AUMA GS200GZ16LR
The Netherlands
July 2016
We performed an inspection and revision on gearbox AUMA GS200GZ16LR.
The conversion operations consists of:
Performing of a visual inspection of the gearbox.
Deploying of the inspection report.
AUMA GS200GZ16LR
The Netherlands
July 2016
We performed an inspection and revision on gearbox BHS RTP-53K.
BHS RTP-53K
Belgium
May 2016
We performed an inspection and revision on FLENDER gearbox SZAK 2425.
FLENDER SZAK 2425
The Netherlands
January 2016
- Performing of the repair constructions.
- Controlling the gearings for bursts by means of magnafluxing.
FLENDER PEAC 4280,6
The Netherlands
January 2014
- Complete inspection of the gearbox.
- Deploying of the inspection report and measurement protocol.
SIEMENS 5346-982
Belgium
January 2014
This report presents the findings of the visual inspection and oil analysis, performed on the propulsion gearbox:
- For the inspection of the gearbox, a videoscope was used. With a videoscope, clear images can be viewed
and recorded at locations with limited accessibility.
- During the inspection, an oil sample has been taken from the gearbox.
- There were no damages found on the gears.
- For the inspection of the gearbox, a videoscope was used. With a videoscope, clear images can be viewed
and recorded at locations with limited accessibility.
- During the inspection, an oil sample has been taken from the gearbox.
- There were no damages found on the gears.
RENK HSUSL-1020
Singapore
December 2013
- Performing of the repair constructions on location.
- Deploying of the inspection report.
FLENDER GRAFFENSTADEN 9721
Belgium
October 2013
- Transporting to our workshop.
- Performing of the repair constructions.
CFEM 27H6SP
Singapore
August 2013
- Transporting to our workshop.
- Performing of the repair constructions.
CFEM 27H6SP
Singapore
August 2013
- Transporting to our workshop.
- Performing of the repair constructions.
CFEM 27H6SP
Singapore
August 2013
- Transporting to our workshop.
- Performing of the repair constructions.
CFEM 27H6SP
Singapore
August 2013
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
CFEM 27H6SP
Singapore
August 2013
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
CFEM 27H6SP
Singapore
August 2013
- Transporting to our workshop.
- Performing of the repair constructions.
CFEM 27H6SP
Singapore
August 2013
- Transporting to our workshop.
- Performing of the repair constructions.
CFEM 27H6SP
Singapore
August 2013