Our activities in Bulk & Container Handling
Overview of our gearbox inspection and repair projects in the Bulk & Container Handling Industry
The Bulk & Container Handling Industry is an important industry for us. Since we are located in The Netherlands near Rotterdam, we do a lot of project for the port of Rotterdam. On this page will find a collection of projects we have done in this industry. By clicking on one of the links below, you can see the details of the project.
The conversion operations consists of:
- Revision on the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The conversion operations consists of:
- Inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
Inspection and cleaning the gearbox.
Repairing the seals and bearings.
At the end we assembled the gearbox and performed a test run.
Repairing the seals and bearings.
At the end we assembled the gearbox and performed a test run.
PIV LB180-12H
This gearbox made a strange noise.
Visual inspection on gearbox of Flender.
Gears were damaged and it was leaking oil.
Damage on the gears and the leakage was repaired by our engineers.
Visual inspection on gearbox of Flender.
Gears were damaged and it was leaking oil.
Damage on the gears and the leakage was repaired by our engineers.
FLENDER H3-SH-19
- Performing of the repair constructions.
- Deploying of the inspection report.
MARLEY UNKNOWN
Inspection on gearbox ZPMC TB 340.47.A1B.
Our findings were reported to our client in a complete inspection repot.
Our findings were reported to our client in a complete inspection repot.
ZPMC TB 340.47.A1B
- Performing of the repair constructions.
- Deploying of the inspection report.
REGGIANA PLANETARY GEARB WGF
Lightnin gearbox made a strange noise.
Performing a vibration measurement to check what the problem was.
They found that the gears were slightly damaged.
Performing a vibration measurement to check what the problem was.
They found that the gears were slightly damaged.
LIGHTNIN model-82-THRU-86
Exchanging and alignment on gearbox DEMAG 20Zw / KF.
DEMAG 20Zw / KF
- Performing of the repair constructions.
- Deploying of the inspection report.
REINTJES WAF-5555
- Disassembly and cleaning all of the parts.
- Inspection and reporting.
- Assembly and making a test run.
- Inspection and reporting.
- Assembly and making a test run.
CONRAD STORK 3R 355 S/3
On gearbox of ZPMC we first checked alignment of the E-engine.
After this was done, we disassembled the coupling.
We now were able to measure the axial clearance in our workshop.
Assembling of the coupling and alignment of the E-engine.
After this was done, we disassembled the coupling.
We now were able to measure the axial clearance in our workshop.
Assembling of the coupling and alignment of the E-engine.
ZPMC FH1060.24.A2A
Our client told us that gearbox ZPMC FH1650.82.C1B was leaking oil.
So we disassembled the gearbox and performed an inspection.
All our findings were reported to our client.
We could easily repair the damage, so the gearbox wasn't leaking oil anymore.
So we disassembled the gearbox and performed an inspection.
All our findings were reported to our client.
We could easily repair the damage, so the gearbox wasn't leaking oil anymore.
ZPMC FH1650.82.C1B
On gearbox WGW KSHK 1330 S/So we performed a preventive inspection.
We first disassembled and cleaned the gearbox.
Findings in our inspection were immediately reported to our client.
A test run was performed for a final check.
We first disassembled and cleaned the gearbox.
Findings in our inspection were immediately reported to our client.
A test run was performed for a final check.
WGW KSHK 1330 S/So
Disassembling, cleaning and inspecting on gearbox VALMET S1B-200-EA.
This gearbox wasn't working the right way, so inspection was needed.
All our findings were reported to our client.
This gearbox wasn't working the right way, so inspection was needed.
All our findings were reported to our client.
VALMET S1B-200-EA
Performing the repair according to our inspection report.
We first disassembled, cleaned and inspected the gearbox.
Repair includes:
- checking all of the bearings and sealings.
- assembling the gearbox again.
- Test run with a test run report.
We first disassembled, cleaned and inspected the gearbox.
Repair includes:
- checking all of the bearings and sealings.
- assembling the gearbox again.
- Test run with a test run report.
ROSSI RCI200U02V
Performing:
- Disassembling, cleaning and inspection on gearbox FLENDER SOND 175.
- Making an inspection report.
- Disassembling, cleaning and inspection on gearbox FLENDER SOND 175.
- Making an inspection report.
FLENDER SOND 175
Adjusting the axial clearance and checking the alignment of the E-engine.
Disassembling the coupling and adjusting the axial clearance in our workshop.
Assembling the coupling again and alignment on the E-engine.
Disassembling the coupling and adjusting the axial clearance in our workshop.
Assembling the coupling again and alignment on the E-engine.
ZPMC FH1060.24.A2A
Performing:
Disassembling, cleaning and inspection on gearbox VALMET S1B-200-EA.
Complete inspection with inspection report for our client.
Disassembling, cleaning and inspection on gearbox VALMET S1B-200-EA.
Complete inspection with inspection report for our client.
VALMET S1B-200-EA
We performed our repairing work according to the inspection report.
Disassembling, cleaning and inspecting all of the gearbox parts.
We renewed all bearings and sealings of gearbox VALMET S1B-200-EA.
Painting the gearbox in the color our client likes.
Disassembling, cleaning and inspecting all of the gearbox parts.
We renewed all bearings and sealings of gearbox VALMET S1B-200-EA.
Painting the gearbox in the color our client likes.
VALMET S1B-200-EA
First performing disassembling and cleaning on gearbox WGW KSHK 1330 S/So.
After cleaning, we did the inspection. We renewed the bearings and sealings.
We also performed a test run on the repaired gearbox.
After cleaning, we did the inspection. We renewed the bearings and sealings.
We also performed a test run on the repaired gearbox.
WGW KSHK 1330 S/So
Our client told us this gearbox VALMET S1B-200-EA had structural problems.
We found this gearbox was leaking.
So we started performing measurement onsite.
We did repair the parts and performed a test run for a final check.
We found this gearbox was leaking.
So we started performing measurement onsite.
We did repair the parts and performed a test run for a final check.
VALMET S1B-200-EA
We performed a visual inspection with an endoscope onsite.
All our findings were reported in our inspection report.
All our findings were reported in our inspection report.
ZPMC 1655.21.C2A
Disassembling and cleaning of the gearbox.
Inspection with inspection report for our client.
Inspection with inspection report for our client.
BONFIGLIOLI PRL 34003-EM65
Checking the alignment of the E-engine onsite.
Disassembling of the coupling. Checking and measuring
of the axial clearance. Adjustment of the bearing covers in our workshop.
Assembling the coupling again and alignment of the E-engine.
Disassembling of the coupling. Checking and measuring
of the axial clearance. Adjustment of the bearing covers in our workshop.
Assembling the coupling again and alignment of the E-engine.
ZPMC FH1655.21.C2A
Adjusting of the axial clearance on gearbox ZPMC FH1060.24.A2A onsite.
Disassembling of the coupling. We checked and measured the axial clearance.
Axial clearance was adjusted and we could assemble the coupling.
At the end we performed an alignment on the E-engine.
Disassembling of the coupling. We checked and measured the axial clearance.
Axial clearance was adjusted and we could assemble the coupling.
At the end we performed an alignment on the E-engine.
ZPMC FH1060.24.A2A
Disassembling and cleaning of gearbox WGW KSHK 1330 S/So.
After cleaning the parts, we could do our inspection work.
We renewed all bearings and repaired all sealings.
Assembling the gearbox and performing a test run.
After cleaning the parts, we could do our inspection work.
We renewed all bearings and repaired all sealings.
Assembling the gearbox and performing a test run.
WGW KSHK 1330 S/So