GBS Gearbox Services international brand of Schaaf- en Boorwerk Rotterdam B.V.
Emergency Hotline
Jahnell Kesterman GD-A1S710

Inspection and repair of Jahnell Kesterman GD-A1S710

Inspection and repair of Jahnell Kesterman GD-A1S710

  • Jahnel Kestermann
  • GD-A1S710
  • Input=___ rpm / ____ KW
  • Jahnel Kestermann gearbox repair
  • Belgium

Scope of work:

We performed an inspection and repair on a gearbox Jahnel Kestermann GD-A1S710.


GBS International performed a complete inspection and complete overhaul on this Jahnell Kesterman GD-A1S710 gearbox from one of our clients in Belgium. After a good test run, we transfered the Jahnell Kesterman GD-A1S710 gear unit back to the client.

Conclusion and recommendations

The axial planes of this used spare bearinghas already been machined for the use for both directions of rotation.The wedge surfaces of this used spare bearing appear to be smaller than visible on the GTW sleeve bearing data sheet. However, no machining of the axial plane is required.

Measured bore diameters of the bearing are just below or at the minimum tolerance specified by customer. 2 of the 6 measuring points were 0.01 mm below minimum specified values. No machining of the bearing bore is required.



contact us

Location - date:

Belgium - April 2017

See JAHNEL KESTERMANN special page

Other types of same brand: